Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

Prediction of Longitudinal Elastic Modulus of Unidirectional Short-Fiber-reinforced Composites

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

A modified Halpin–Tsai model for predicting the elastic modulus of composite materials

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

Stress Transfer Model and Micromechanic Analyses of Unidirectional Single-short-fiber Composite

Predicting the Elastoplastic Response of Fiber-Reinforced Metal Matrix Composites

Predic on Bulk Modulus and Transverse Shear Modulus of Multiphase Fiber Composites

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

Multiscale Thermomechanical Modeling of Short Fiber-Reinforced Composites

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Prediction of the Overall Moduli of a Cylindrical Short-Fiber Reinforced Composite

Static Compressive Strength Prediction of Open-Hole Structure Based on Non-Linear Shear Behavior and Micro-Mechanics

Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

Prediction of Tensile Strength of Short Fiber Reinforced Elastomer Composites

Effect of fiber arrangement on mechanical properties of short fiber reinforced composites

Investigation on A Direct Modeling Strategy for the Effective Elastic Moduli Prediction of Composite Material

Multiscale simulation and theoretical prediction for the elastic properties of unidirectional fiber‐reinforced polymer containing random void defects

On micromechanics approach to stiffness and strength of unidirectional composites

Mesoscopic Prediction on Dynamic Visco-Elastic Performance of Particular Reinforced Composites

Prediction Models of Mechanical Properties of Jute/PLA Composite Based on X-ray Computed Tomography

A 3D Micromechanics-Based Failure Criterion for Fiber Reinforced Composites under Longitudinal Compression