Abstract:A computationally economic finite-element-based approach has been developed to predict the stress–strain and fracture behaviour of an 8-Harness satin woven ceramic matrix composite with strain-induced damage. The finite element analysis utilises a solid element to model the behaviour of the homogenised orthotropic uni-directional tow and its matrix. The underpinning models of the tow and matrix, (Tang et al., 2009) capture the physics of the interactions between fibres and matrix; and, in this way, permit modelling that bridges the length scales of the fibres and full-scale components. The non-linear multi-axial stress–strain behaviour of the composite has been discretised by multi-linear elastic curves; and the latter has been used as input to a user defined subroutine, UMAT, in the commercial finite element package, ABAQUS. A partial unit cell model has been constructed of the 8-Harness satin weave composite of carbon fibres embedded in an amorphous carbon matrix, HITCO C/C. Predictions of the global stress–strain curve, which include the effects of fibre waviness, have been made for two failure modes: the first by deformation localisation, and the second by dynamic tow failure on fibre fracture, triggered by instantaneous pull-out deactivation. Comparisons have been made between the predictions and experimental data that exhibit two classes of fracture behaviour: brittle and quasi-ductile. The predicted results, both with and without tow waviness, compare well with the experimental data; however, the predictions for waviness are slightly better. The two extremes of experimental behaviour have been found to correspond with the two tow fracture criteria modelled.

Prediction of stress–strain response of unidirectional ceramic matrix composites under arbitrary loading and unloading

Prediction of tensile behavior of plain weave ceramic matrix composites from tow properties with progressive damage

Stress–strain and Fracture Behaviour of 0°/90° and Plain Weave Ceramic Matrix Composites from Tow Multi-Axial Properties

Prediction of stress–strain and fracture behaviour of an 8-Harness satin weave ceramic matrix composite

Micromechanical Modeling Tensile and Fatigue Behavior of Fiber-Reinforced Ceramic-Matrix Composites Considering Matrix Fragmentation and Closure

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Effect of Stochastic Loading on Tensile Damage and Fracture of Fiber-Reinforced Ceramic-Matrix Composites

Constitutive model and failure criterion for orthotropic ceramic matrix composites under macroscopic plane stress

Modeling Loading/Unloading Hysteresis Behavior of Unidirectional C/SiC Ceramic Matrix Composites

Development and validation of damage and failure models for the design of ceramic matrix composite components

A Quantitative Representation of Damage and Failure Response of 3D Textile SiC/SiC Ceramics Matrix Composites Subjected to Flexural Loading

Influence of Applied In-Plane Strain on Transverse Thermal Conductivity of 0°/90° and Plain Weave Ceramic Matrix Composites

A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis

Predicting tensile behaviour of plain weave CMCs using a nonlinear data-driven constitutive model for fibre tow composites

Modeling the Monotonic and Cyclic Tensile Stress-Strain Behavior of 2D and 2.5D Woven C/SiC Ceramic-Matrix Composites

Mesoscopic modelling of UHPCC material under dynamic tensile loadings

Relationship between hysteresis loops and cracking evolution/closure in ceramic-matrix composites under tension-tension fatigue loading

Experimental and Numerical Investigations on the Stress Waves Propagation in Strain-Hardening Fiber-Reinforced Cementitious Composites: Stochastic Analysis Using Polynomial Chaos Expansions

A Peridynamic Differential Operator Modeling Approach for Ceramic Matrix Composites Microstructure with Uniform or Non-Uniform Discretization

Predictions of transverse thermal conductivities for plain weave ceramic matrix composites under in-plane loading

Crack Opening Behavior in Ceramic Matrix Composites