Abstract:Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for mixed ductile-brittle failure modes is formulated and used to investigate the effect of precipitate morphology and size distribution on damage evolution in aluminum alloys. A thermodynamically consistent framework for elastic and plastic work dissipation in the fracture process zone is used to formulate the coupled constitutive behavior for brittle and ductile damage, respectively. Representative Volume Elements (RVE) with varying particle morphology and orientation were generated and their uni-axial loading was simulated to assess the damage resistance of the different model microstructures. For critical energy release rate $G_c$ values of the aluminum matrix ranging from 4 to 8~Jm$^{-2}$ for single crystals and from 10 to 16~Jm$^{-2}$ for polycrystals, the model predicts a change in failure modes from particle debonding to cracking followed by ductile matrix failure. The change of particle failure mechanism as a result of increased $G_c$ is observed for both, single and polycrystalline model microstructures. For the case of particle debonding, microstructures with circular or ellipsoidal particles (with the major axis perpendicular to the loading direction) show a higher ductility and fracture work compared to the other studied cases. In the case of particle cracking, microstructures with ellipsoidal particles aligned parallel to the loading axis show a higher ductility and fracture work among the investigated cases. The simulations qualitatively reproduce the experimentally observed particle failure mechanisms (cracking and debonding) for two different matrix alloy classes (commercially pure and 2xxx alloys) reinforced with ceramic particles.

The Influence of the Volume Fraction of Ceramic Particles on the Plastic Strain Localization and Fracture of Metal Matrix Composites. Computational Analysis

Numerical Study of the Influence of Residual Thermal Stresses on the Fracture of Metal Matrix Composites

Localization of deformation and formation of residual stresses in metal-matrix composites

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

A Physically-Based Plastic Constitutive Model Considering Nanoparticle Cluster Effect for Metal Matrix Nanocomposites

Plastic deformation and fracture behaviors in particle-reinforced aluminum composites: A numerical approach using an enhanced finite element model

Influence of Features of Interphase Boundaries on Mechanical Properties and Fracture Pattern in Metal–Ceramic Composites

Finite element simulation of the Portevin–Le Chatelier effect in highly reinforced metal matrix composites

Numerical Simulations of the Dynamic Compressive Properties of Ceramic Particle Reinforced Metal Matrix Composites

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

Atomistic investigation of deformation and fracture of individual structural components of metal matrix composites

Simulation of Deformation and Fracture in Polycrystalline Aluminum Alloy under Dynamic Loading

Finite element analysis of the thermomechanical behavior of metal matrix composites (MMC)

Metal-ceramic materials. Study and prediction of effective mechanical properties

A Study of Particle Size Effect and Interface Fracture in Aluminum Alloy Composite Via an Extended Conventional Theory of Mechanism-Based Strain-Gradient Plasticity

Effect of Stochastic Loading on Tensile Damage and Fracture of Fiber-Reinforced Ceramic-Matrix Composites

Anisotropic effect of regular particle distribution in elastic-plastic composites: The modified tangent cluster model and numerical homogenization

A Three-Dimensional Strain Gradient Plasticity Analysis of Particle Size Effect in Composite Materials

Phase-Field Modeling of Coupled Brittle-Ductile Fracture in Aluminum Alloys