Abstract:In a comprehensive study, effects of casting methods such as gravity sand casting, squeeze casting and composite casting in semi-solid state and casting variables (i.e., cooling rate, stirring speed and shear forces) on the microstructure, porosity formation and mechanical properties of A356–SiC nanocomposites were investigated thoroughly. First, a step-like sample was used to make the sand casting samples to study the effects of different cooling rates that each step experienced on the properties of nanocomposite, where squeeze casting and composite casting samples were produced in a metallic mold. Once the samples were produced and prepared for the studies, grain size, shape factor, dendritic and globular microstructure, amount of eutectic phase and mechanism of porosity formation, mechanical properties and fracture surface of the samples were analyzed precisely and discussed. In addition, the effects of stirring forces, time and temperature, used in the squeeze casting and the compo-casting methods, on the morphology of the dendritic arms of aluminum matrix composites were investigated and compared with the microstructure of castings produced by conventional gravity casting. It was discovered that switching from the gravity sand casting process to the squeeze casting process delivers a less dendritic and more refined microstructure in the nanocomposite. However, composite castings produced in the semi-solid state by applying high stirring shear forces for 80 s produce the finest and the most globular and spherical microstructure. This optimized globularization condition provides desired microstructure and mechanical properties for this type of nanocomposite. The dominant failure mechanism in the composite casting samples produced in semi-solid state was ductile, where it was a mix of ductile/brittle for the squeeze casting and brittle for the sand casting samples. Finally, the effects of globularization temperature on the nucleation and growth of primary α grains were studied.

Microstructure Characteristics of A356 Nanocomposites Manufactured via Ultrasonic Cavitation Processing Under Controlled Solidification Conditions

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Nucleation Catalysis in Aluminum Alloy A356 Using Nanoscale Inoculants

Solidification Microstructure of SiC Particulate Reinforced Zn–Al Composites under Ultrasonic Exposure

Ultrasound Cavitation Induced Nucleation in Metal Solidification: an Analytical Model and Validation by Real-Time Experiments.

Preparation of MgAl2O4-Coated Al2O3np and Migration of Ceramic Nanoparticles during Ultrasonic Processing of Aluminum Matrix Composites

Microstructure and Mechanical Properties of In-Situ Nano Γ-Al2o3p/a356 Aluminum Matrix Composite

In Situ Small Angle X-Ray Scattering Investigation of Ultrasound Induced Nucleation in A Metallic Alloy Melt

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

An Investigation of Nanoparticle Wetting, Grain Refinement and Mechanical Property Enhancement in Aluminum Matrix Nanocomposites

Effects of High Intensity Ultrasonic Processing on Microstructure and Mechanical Properties of In-Situ Al_3Ti/A356 Composites

Microstructure and Mechanical Properties of Cu-CoatedCarbon-Nanotubes-Reinforced Aluminum Matrix Composites Fabricated by Ultrasonic-Assisted Casting

Correlations to Predict Microstructure and Mechanical Properties of Ultrasonically Cast Metal Matrix Nanocomposites as a Function of Treatment Time

Microstructure Evolution and Mechanical Properties of As-Cast and Ultrasonic Treated Nb-16Si-xCr Alloys

Processing, Microstructure and Mechanical Properties of Magnesium Matrix Nanocomposites Fabricated by Semisolid Stirring Assisted Ultrasonic Vibration

Microstructure and Mechanical Properties of the Semisolid Slurries and Rheoformed Component of Nano-Sized SiC/7075 Aluminum Matrix Composite Prepared by Ultrasonic-Assisted Semisolid Stirring

The Influence of the Casting Methods and Variables on the Microstructural Properties of A356–SiC Nanocomposite

Research on Fabrication and Semisolid Processing of Semisolid Slurries of 7075 Aluminum Matrix Composites Reinforced with Nano-Sized SiC Particles

Untrasonic-Assisted Fabrication of SiC Nanoparticles Reinforced Aluminum Matrix Composites

Effects of ultrasonic cavitation on microstructure and surface properties of Mn–Cu alloy

Effects of Niobium and Ultrasonic Action Coupling on Microstructure Evolution and Mechanical Properties of Ti46Al2.6 C Alloy