Abstract:In a comprehensive study, effects of casting methods such as gravity sand casting, squeeze casting and composite casting in semi-solid state and casting variables (i.e., cooling rate, stirring speed and shear forces) on the microstructure, porosity formation and mechanical properties of A356–SiC nanocomposites were investigated thoroughly. First, a step-like sample was used to make the sand casting samples to study the effects of different cooling rates that each step experienced on the properties of nanocomposite, where squeeze casting and composite casting samples were produced in a metallic mold. Once the samples were produced and prepared for the studies, grain size, shape factor, dendritic and globular microstructure, amount of eutectic phase and mechanism of porosity formation, mechanical properties and fracture surface of the samples were analyzed precisely and discussed. In addition, the effects of stirring forces, time and temperature, used in the squeeze casting and the compo-casting methods, on the morphology of the dendritic arms of aluminum matrix composites were investigated and compared with the microstructure of castings produced by conventional gravity casting. It was discovered that switching from the gravity sand casting process to the squeeze casting process delivers a less dendritic and more refined microstructure in the nanocomposite. However, composite castings produced in the semi-solid state by applying high stirring shear forces for 80 s produce the finest and the most globular and spherical microstructure. This optimized globularization condition provides desired microstructure and mechanical properties for this type of nanocomposite. The dominant failure mechanism in the composite casting samples produced in semi-solid state was ductile, where it was a mix of ductile/brittle for the squeeze casting and brittle for the sand casting samples. Finally, the effects of globularization temperature on the nucleation and growth of primary α grains were studied.

Physical, Corrosion and Microstructural Analysis of A356/SiC Nanocomposites Fabricated through Stir Casting Process

The Influence of the Casting Methods and Variables on the Microstructural Properties of A356–SiC Nanocomposite

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Mechanical Properties of Aluminum-4043/Nickel-coated Silicon Carbide Composites Produced via Stir Casting

Experimental investigation in enhancing the mechanical, wear and corrosion resistance properties of Al6061-SiC-NSA composites fabricated using stir casting process.

Microstructural, mechanical and corrosion behaviour of Al–Si alloy reinforced with SiC metal matrix composite

Surface Modified Reinforcements on the Structure Properties of A356/SiC Stir Cast Composite

SiC and MWCNT Blending Actions on Functional Performance of Hybrid AA2024 Alloy Nanocomposite Via Two Step Stir Cast Route

Microstructure And Mechanical Properties Of Al-Sic Nanocomposites Synthesized By Surface-Modified Aluminium Powder

Effect of Microstructure on Mechanical Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles

Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash

Implications of SiC/Al2O3 Reinforced Al-Mg-Zn Alloy Hybrid Nano Composites Using Vacuum Sintering Method

Effect of Nanoaluminium Nitride Ceramic Particles on Microstructure, Mechanical Wear, and Machining Behavior of Al-Si-Mg Alloy Matrix Composites Produced by Bottom Pouring Type Stir Casting Route

Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing

Analysis and Experimental Investigation of A356 Aluminium Alloy Hybrid Composites Reinforced with Gr-FE3O4-B4C Nanoparticles Synthesised by Selective Laser Melting (SLM)

Investigating the Effect of Particle Sizes of SiC and Graphite on Strengthening of Aluminium Metal Matrix Composites

Effect of Nano- and Submicron SiC on the α-Al Dendrite Size and Mechanical Strength of SiC/A356 Composites

Microstructure, mechanical properties and wear behavior of Mg matrix composites reinforced with Ti and nano SiC particles

Microstructure Evolution and Mechanical Behaviors of SiCp/CNTs Hybrid Reinforced Al-Si-Cu-Mg Composite by Semi-solid Stir Casting

Microstructural, mechanical, and wear properties of ultrasonic assisted stir casted A356 Alloy/AlN composite

Microstructure and mechanical properties of SiCnp/Al6082 aluminum matrix composites prepared by squeeze casting combined with stir casting