Abstract:Aluminum-based metal matrix composites (AMMCs) find extensive applications in aerospace, automotive, defence and various sectors on account of remarkable mechanical properties, lightweight nature, and excellent dimensional stability. In this research, AA7075 matrix material was reinforced with tungsten carbide ceramic particles with various 0, 5, 10, 15 and 20 weight percentages (wt.%) with the use of Ultrasonic assisted stir casing setup. The stir casted AA7075 MMCs were subjected to XRD, SEM, and density test to analyse the presence of elements, microstructure and density. The tensile, micro hardness, and wear test were performed on AL7075 based MMCs after conducting NaCl based spray test at the condition of spray pressure of 1.2 kg/cm2, spray duration of 120 hours and PH value of 8.2 to determine the micro hardness, Ultimate Tensile Strength and wear resistance. The XRD test confirmed the presence of secondary phases such as Al2Cu, W2C, and MgZn2 with Al and WC phases. The SEM test confirmed the uniform dispersion and no more cluster formation upto 15wt.% WC addition and agglomeration of WC was occurred in the addition of 20wt.% of WC.. The enhancing of wt.% of WC enhanced the Micro hardness, UTS, wear and corrosion resistance up to 15 wt. % addition and decreases by the 20 wt.% WC addition. The higher tensile strength 312 MPa was obtained from AA7075/15wt.%WC composite. The lower wear rate 0.11 mg/m was obtained from AA7075/15wt.%WC at 1000 m sliding distance with 1.2 m/s sliding velocity. The improved mechanical and tribological properties were mainly depended on strengthening mechanisms such as load transfer mechanism and dislocation strengthening mechanism.

Enhancing the Microstructure and Mechanical Properties of Cast Aluminum Matrix Composites Through Nano-Al2O3 Reinforcement via CMT and PMC Welding

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Effect of nano-Sized Al2O3 Particles on Microstructure and Mechanical Properties of Aluminum Matrix Composite Fabricated by Multipass FSW

Microstructure and Mechanical Properties of Cu-CoatedCarbon-Nanotubes-Reinforced Aluminum Matrix Composites Fabricated by Ultrasonic-Assisted Casting

Effect of Increasing the Strength of Aluminum Matrix Nanocomposites Reinforced with Microadditions of Multiwalled Carbon Nanotubes Coated with TiC Nanoparticles

Microstructure and mechanical properties of friction stir welded AZ31 magnesium alloy reinforced with ZrB 2

Effect of Nanoaluminium Nitride Ceramic Particles on Microstructure, Mechanical Wear, and Machining Behavior of Al-Si-Mg Alloy Matrix Composites Produced by Bottom Pouring Type Stir Casting Route

Experimental Studies on Mechanical Properties of Carbon Nanotube Reinforced Aluminum 7075 Composite Material

Nano-additive manufacturing of multilevel strengthened aluminum matrix composites

Analysis and Experimental Investigation of A356 Aluminium Alloy Hybrid Composites Reinforced with Gr-FE3O4-B4C Nanoparticles Synthesised by Selective Laser Melting (SLM)

Simultaneous Improvement of the Electric Conductive and Mechanical Properties of Nanostructured Aluminum Alloy

Influence of Vanadium and Niobium Carbide Particles on the Mechanical, Microstructural, and Physical Properties of AA6061 Aluminum-Based Mono- and Hybrid Composite Using FSP

Effects of Nano-Modification on the Microstructural Evolution and Mechanical Properties of AA7075/AA6061 Aluminum Alloy Joints Fabricated by Laser-Mig Hybrid Welding Technique

Enhanced mechanical and tribological properties of ultrasonically assisted stir-cast AA7075 metal matrix composites in challenging corrosive environments

The Effects of Nanoparticle Reinforcement on the Micromilling Process of A356/Al2O3 Nanocomposites

Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash

Microstructure and Mechanical Properties of Friction Stir Welded SiC/TiB2 Reinforced Aluminum Hybrid Composites

Mechanical and Microstructure Behavior of AA7050 Metal Matrix Composite Reinforced with TiO2/BN

A Polymer-Based Metallurgical Route to Produce Aluminum Metal-Matrix Composite with High Strength and Ductility

Microstructural Evolution, Tensile Failure, Fatigue Behavior and Wear Properties of Al2O3 Reinforced Al2014 Alloy T6 Heat Treated Metal Composites

A comprehensive study of Al-Cu-Mg system reinforced with nano-ZrO2 particles synthesized by powder metallurgy technique