Abstract:Magnesium matrix composites are extensively used in automotive and structural applications due to their low density, high strength, and wear-resistant properties. To reach the scope of industry needs, research is carried out regarding enhancing the mechanical and tribological behavior of the magnesium composites by reinforcing the nano-sized reinforcements. In the present work, research has been carried out to enhance the properties of the magnesium AZ91D hybrid composite by reinforcing carbon fibers (CFs) and multi-walled carbon nanotubes (MWCNTs) with varying weight percentages (AZ91D + 0.5% CF's + 0.5% MWCNT and AZ91D + 0.75% CF's + 0.75% MWCNT, respectively). The experimental tests were carried out to evaluate the mechanical and tribological behavior of the composites. The test results showed that the addition of CF and MWCNT reinforcements improved the hybrid Mg composite's hardness, tensile strength, and impact strength compared to the base Mg matrix. The AZ91D + 0.75% CF's + 0.75% MWCNT hybrid composite showed a 19%, 35%, and 66% increased hardness, tensile strength, and impact strength, respectively, compared to the base Mg AZ91D. The wear test results also showed the improved wear resistance of the Mg composite compared to the base matrix. The enhanced wear resistance of the composite is due to the addition of hard MWCNT and CF reinforcements. The wear rate of the AZ91D + 0.75%CF's + 0.75% MWCNT composite for a load of 30 N at a sliding distance of 1500 m is lower as compared to the base matrix. The SEM micrographs of the worn surfaces revealed the existence of abrasive wear. The improved mechanical and tribological behavior of the magnesium composite is also due to the homogeneous distribution of the hard reinforcement particles along the grain boundaries.

Experimental Studies on Mechanical Properties of Carbon Nanotube Reinforced Aluminum 7075 Composite Material

Processing and Properties of Carbon Nanotubes Reinforced Aluminum Composites

Molecular dynamics study of mechanical properties of carbon nanotube reinforced aluminum composites

Effect of Carbon Nanotubes as Reinforcement on the Mechanical Properties of Aluminum-Copper-Magnesium Alloy

Mechanical properties of Al matrix composites reinforced with carbon nanotubes prepared by powder metallurgy

Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash

Tribological behaviour of multi-walled carbon nanotubes reinforced AA 7075 nano-composites

Microstructural Behavior and Mechanical Properties of AA7010/Tic/Graphene Hybrid Nanocomposite Synthesized by Stir Casting

Mechanical Properties and Strain Hardening Behavior of Aluminum Matrix Composites Reinforced with Few-Walled Carbon Nanotubes

Microstructural evolution and mechanical properties of multiwalled carbon nanotubes/Al6082 nanocomposites through optimized T6 heat treatment process

Mechanical Properties and Fracture Characterization of 2024al Composite Reinforced with Carbon Nanotube

Investigation On Tensile Properties Of Aluminum 7075 - Silica Particles -Boron Fiber- Reinforced Hybrid Metal Matrix Composites

Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites

Effect of Multi-Walled Carbon Nanotubes and Carbon Fiber Reinforcements on the Mechanical and Tribological Behavior of Hybrid Mg-AZ91D Nanocomposites

Effect of Carbon Nanotube Dispersion on Mechanical Properties of Aluminum-Silicon Alloy Matrix Composites

Mechanical and Microstructure Behavior of AA7050 Metal Matrix Composite Reinforced with TiO2/BN

Microstructure and Mechanical Properties of Cu-CoatedCarbon-Nanotubes-Reinforced Aluminum Matrix Composites Fabricated by Ultrasonic-Assisted Casting

Investigation of the mechanical properties of nanocomposites with multi-wall carbon nanotube reinforcement and carbon fiber/epoxy

On the Study of a TiB2 Nanoparticle Reinforced 7075al Composite with High Tensile Strength and Unprecedented Ductility

Carbon Nanotube-Reinforced Aluminum Matrix Composites Enhanced by Grain Refinement and in Situ Precipitation

The effect of reinforcement particles weight percentage on the mechanical properties and plastic flow behaviour of aluminum alloy 7075 matrix material