Abstract:This study focuses on the effects of a hybrid reinforcement consisting of nanosized particles of Palm Sprout Shell Ash (PSSA) and silicon carbide (SiC) on the mechanical and tribological properties of the Al-Cu-Mg alloy. Hybrid reinforced composites with different weight percentages of SiC and PSSA (0:0, 0:4, 1:3, 2:2, and 4:0 wt.%) were prepared using the ultrasonic-assisted bottom-poured stir casting technique. SEM and EDS were used to characterize the hybrid composite made of Al-Cu-Mg alloy. Optical and SEM microstructural analyses demonstrated an even distribution of SiC and PSSA nano-reinforcements within the matrix. EDS analysis revealed SiC and PSSA reinforcement in the matrix. The mechanical properties (tensile, flexural, and impact strength) and wear properties of the composites and alloy were evaluated according to the ASTM standards. The hybrid reinforced composites displayed remarkable results compared with the base alloy. Among all composites, the 2:2 wt.% SIC and PSSA hybrid reinforced composite exhibited a significant enhancement in both tensile strength and flexural strength, with a 29.15% increase in tensile strength and a 27.64% increase in flexural strength. However, the inclusion of these reinforcements led to a declined in ductility and impact strength of the Al-Cu-Mg alloy composite. Maximum reductions in ductility and impact strength were observed in the 0:4 wt.% SiC and PSSA-reinforced composites, with decreases of 47.67% and 3.56%, respectively. For the 2:2 wt.% SiC and PSSA composites, these reductions were 23.64% and 3.16%, respectively. The SEM analysis of the fractured surfaces of the composites tested for the mechanical properties revealed evidence of both ductile and brittle fracture mechanisms in the tensile, flexural, and impact tests. The wear behaviour of the prepared samples was evaluated, and all composites exhibited superior performance compared with the base alloy, demonstrating adhesive and abrasive wear mechanisms and varying coefficients of friction.

The effect of reinforcement particles weight percentage on the mechanical properties and plastic flow behaviour of aluminum alloy 7075 matrix material

Investigation On Tensile Properties Of Aluminum 7075 - Silica Particles -Boron Fiber- Reinforced Hybrid Metal Matrix Composites

Fabrication and Mechanical Behaviour Investigation on Aluminium 7075 Boron Carbide and Inconel Alloy 625 Metal Matrix Composite Using Ultra Sonic Stir Casting Method

Investigation on the effect of SiC and TiB2 ceramic particles on mechanical and tribological properties of Al7075 hybrid metal matrix composites prepared through conventional stir casting technique

Development and wear behavior investigation on aluminum-7075/B4C/fly ash metal matrix composites

Effect of particle size and volume fraction on the strengthening mechanisms of boron carbide reinforced aluminum metal matrix composites

Influence of Silicon Carbide Reinforcements on Mechanical and Wear Behaviour AA7075/15% wt. Glass fiber Hybrid Composites

Effect of Microstructure on Mechanical Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Performance analysis and mechanical behavior of aluminum metal matrix composite

MECHANICAL PROPERTIES CHARACTERIZATION OF AL- 7075 / PHOSPHOGYPSUM METAL MATRIX COMPOSITES

Effect of forging on mechanical properties of rice husk ash-silicon carbide reinforced Al1100 hybrid composites

A Study On The Effects Of Hybrid (Sic- Pssa) Nano Sized Reinforcement On Mechanical And Tribological Behaviour Of Al Alloy-Based Metal Matrix Composite Produced By Ultrasonic Assisted Stir Casting

Investigation on Mechanical Properties of Agro and Industrial Waste Reinforcement in Aluminium 7075 Composite with Liquid Metal Stir Casting Route

Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite

Investigating the Effect of Particle Sizes of SiC and Graphite on Strengthening of Aluminium Metal Matrix Composites

Mechanical, Wear, and Low-Velocity Impact Studies of AL7075/Basalt/Mica Particle Hybrid Metal Matrix Composite through Stir Casting Route

Investigation on Mechanical Behavior of Al6061- Coconut Shell Ash- Granite Dust Reinforced Hybrid Metal Matrix Composites Manufactured using Stir Casting Technique

Evaluation of Mechanical Properties of Ceramic Reinforced Aluminium-7029 Hybrid Composite

Mechanical and wear behavior of Al 7075/Al2O3/SiC/mg metal matrix nanocomposite by liquid state process

Influence of hybrid reinforcements on the mechanical properties and morphology of AZ91 magnesium alloy composites synthesized by ultrasonic-assisted stir casting