Abstract:Aims: The primary aim of this research is to understand the effects of type of nanoparticles on the microstructure and mechanical properties of Mg-based hybrid nanocomposites. For this reason, new Mg-based hybrid nanocomposites containing 2.2 vol.% Ti and 1.1 vol.% nano-Al2O3 or nano B4C particles were synthesized and their properties were studied in comparison with Mg-Ti and pure Mg. Background: Magnesium with excellent weight-saving potential is ideal for automotive and aerospace applications. But its use in pure Mg is restricted due to inherent limitations such as poor absolute strength, elastic modulus, deformability, and corrosion susceptibility. While most of these limitations can be circumvented by the judicious addition of micron-sized ceramic reinforcements, ductility is often compromised. One of the promising ways for ductility enhancement involves the use of nano-length scale reinforcements. Similar ductility improvements were also reported when hybrid reinforcements were introduced into the Mg matrix. While the role of hybrid reinforcement preparation, the particle size distribution, and volume fraction of hybrid reinforcements were studied extensively in the past, no detailed investigation on the effects of type of nanoparticles has been conducted so far. Objective: The objectives of this research include the successful synthesis and property characterization of Mg-based hybrid nanocomposites containing hybrid (Ti+Al2O3 or Ti+B4C) reinforcements. Result: While both hybrid nanocomposites displayed fine grains when compared to pure Mg and Mg-Ti, there was no noticeable difference between the grain size distribution profiles of Mg- (Ti+Al2O3) and Mg-(Ti+B4C) hybrid composites. The results of property measurements indicated an improvement in dimensional stability, indentation, tension, and compression properties of Mg due to the addition of either individual Ti or hybrid (Ti+Al2O3) or Mg-(Ti+B4C) particles. Among the hybrid composites, Mg-(Ti+B4C) containing hybrid (Ti+B4C) reinforcement exhibited a better combination of strengths and ductility. While the inherent strengthening contribution from B4C and Al2O3 reinforcements resulted in slightly different strength properties, the ductilization benefits of boron compounds enhanced the tensile fracture strain of Mg-(Ti+B4C). Conclusion: Since the particle size distribution and volume fraction of (Ti+Al2O3) and (Ti+B4C) are similar, the difference in strength values between Mg-(Ti+Al2O3) and Mg-(Ti+B4C) can be attributed to the matrix strengthening contribution from reinforcement type.

Microstructural Behavior and Mechanical Properties of AA7010/Tic/Graphene Hybrid Nanocomposite Synthesized by Stir Casting

Mechanical and Microstructure Behavior of AA7050 Metal Matrix Composite Reinforced with TiO2/BN

Experimental Studies on Mechanical Properties of Carbon Nanotube Reinforced Aluminum 7075 Composite Material

Investigation of Microstructural, Mechanical and Corrosion Properties of AA7010-TiB2 in-situ Metal Matrix Composite

Synthesis and characterization of AA7075/SiC/graphene hybrid composite

Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite

Synergistic Effects of Graphene and Ceria Nanoparticulates on Microstructure and Mechanical Behavior of Stir-Cast Hybrid Aluminum Composite

Room and High Temperature Tensile Responses of Tib2-Graphene Al 7075 Hybrid Composite Processed through Squeeze Casting

Magnesium Based Hybrid Nanocomposites: An Insight into Nanoparticle Effects on the Microstructure and Mechanical Properties

Mechanical Performance and Corrosion Behaviour of Aluminum7075 Reinforced by Nano-Titanium dioxide

Effect of Secondary Processing and Nanoscale Reinforcement on the Mechanical Properties of Al-TiC Composites

Tribological, mechanical and microstructure characteristics of hybrid aluminium matrix composite containing titanium carbide (TiC) and graphite particles

Effect of Microstructure on Mechanical Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles

Evaluation of phase, microstructural and mechanical characteristics in stir casted AA6351-Gr-TiC hybrid metal matrix composites

Assessment of Mechanical Behaviour and Microstructure of Micro Boron Carbide Particles Reinforced Al2011 Alloy Metal Matrix Composite for Aerospace Applications

Effect of Increasing the Strength of Aluminum Matrix Nanocomposites Reinforced with Microadditions of Multiwalled Carbon Nanotubes Coated with TiC Nanoparticles

Effects of Graphene Nanoplates on the Mechanical Behavior and Strengthening Mechanism of 7075Al Alloy

Mechanical and wear analysis of AA6061-T6-SiC-TiC-graphite metal matrix composite

Mechanical Characterization of Graphene Reinforced Al2024/Albite Hybrid Composites by Powder Metallurgy.

Thermo-Mechanical, Tribological and Microstructural Properties of Aluminium AA8011/B4C/Graphene Based Hybrid Composites

SiC and MWCNT Blending Actions on Functional Performance of Hybrid AA2024 Alloy Nanocomposite Via Two Step Stir Cast Route