Abstract:The recycling of industrial wastes instead of their burial disposing is necessary for maintaining the environment. In the current research, aluminum dross waste was utilized for preparing sintered Al/Al2O3 hybrid composites reinforced with different amounts of SiC and graphene up to 8 and 4 wt %, respectively. To obtain nanocomposite powders, aluminum dross and reinforcing materials were milled by high energy ball milling for 10 h. The particles' shapes and sizes of prepared nano powder were characterized by transmission electron microscope while the phase composition, crystallite size, lattice strain and dislocation density were investigated by X-ray diffraction technique. To fabricate sintered hybrid composites, the prepared nano powders were pressed and sintered at 1000 and 1200 °C. The physical properties in-terms of bulk density and apparent porosity of sintered composites were determined by liquid-displacement technique. The microstructure and phase composition were examined by scanning electron microscopy and X-ray technique, respectively. Furthermore, compressive strength, microhardness, wear resistance and dielectric properties were investigated in details. Also, pulse-echo technique was used to determine the elastic moduli. The results showed that the particle size of milled aluminum dross (Al/Al2O3) powder which contains 8 wt% SiC and 4 wt% graphene is 43.8 nm while its crystal size is equal 19.2 nm. Generally, all physical, mechanical and electrical properties were improved after increasing the sintering temperature from 1000 to 1200 °C and the reinforcement amounts. When this batch sintered at 1200 °C, the microhardness, compressive strength and elastic moduli increased by about 142.5, 44.8 and 46% while the wear rate was reduced by about 27% as compared to the composite that contain zero SiC and graphene. The increasing of SiC and graphene in Al/Al2O3 composites as well as sintering temperature led to positive effect on AC conductivity (σac), dielectric constant and dielectric loss.

Mechanical Characterization of Graphene Reinforced Al2024/Albite Hybrid Composites by Powder Metallurgy.

Synthesis and characterization of AA7075/SiC/graphene hybrid composite

Enhancing the Mechanical Properties of AM60B Magnesium Alloys through Graphene Addition: Characterization and Regression Analysis

Thermo-Mechanical, Tribological and Microstructural Properties of Aluminium AA8011/B4C/Graphene Based Hybrid Composites

Evaluation of Mechanical Properties of Ceramic Reinforced Aluminium-7029 Hybrid Composite

Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites

Influence of graphene nanoplates and titanium diboride particulate on wear and interfacial bonding properties of sintered aluminium alloy composites

Fabrication of efficient aluminium/graphene nanosheets (Al-GNP) composite by powder metallurgy for strength applications

Enhancement of Physical Properties and Corrosion Resistance of Al-Cu-Al2O3/Graphene Nanocomposites by Powder Metallurgy Technique

Synergistic Effects of Graphene and Ceria Nanoparticulates on Microstructure and Mechanical Behavior of Stir-Cast Hybrid Aluminum Composite

Homogeneous dispersion and mechanical performance of aluminum reinforced with high graphene content

Mechanical and electrical properties of graphene nanosheet reinforced copper matrix composites materials produced by powder metallurgy method

Investigation of Mechanical and Tribological Properties of Al7075-Al2O3-GNPs Hybrid Composites Produced by Powder Metallurgy and Induction Hot Pressing

Mechanical and Tribological Properties of Graphene-Reinforced Bimodal AA7075 Composites

Microstructural Behavior and Mechanical Properties of AA7010/Tic/Graphene Hybrid Nanocomposite Synthesized by Stir Casting

Analysis and Experimental Investigation of A356 Aluminium Alloy Hybrid Composites Reinforced with Gr-FE3O4-B4C Nanoparticles Synthesised by Selective Laser Melting (SLM)

Microstructural Characterization, Mechanical And Wear Behaviour Of Al2024-B4C Composites For Aerospace Applications

Characterization of mechanical and tribological properties of graphite and alumina reinforced zinc alloy (ZA-27) hybrid metal matrix composites

Investigation of Microstructures and Mechanical Properties of Al2024/6061/7075-Graphene Composites

Fabrication of Al/Al2O3/ SiC/graphene hybrid nanocomposites from Al-dross by powder metallurgy: Sinterability, mechanical and electrical properties

Microstructure analysis, tribological correlation properties and strengthening mechanism of graphene reinforced aluminum matrix composites