Abstract:In the present study aluminium metal matrix composites (Al - MMCs) reinforced with different Wt% (2,3,4,5 and 6) of Silicon carbide (SiC) and hybrid composites of aluminium matrix reinforced with different Wt% (2,3,4,5 and 6) of SiC and constantly adding Boron carbide (B 4 C) with 2 wt% were fabricated using a cost effective powder metallurgy (PM) method and the mechanical alloying process. Mechanical properties like micro structure, phase analysis, hardness, compression strength, density, porosity and wear were characterized and investigated for the aluminium matrix composite (AMC) samples. Microstructural characterization of sintered samples was performed using a Scanning electron microscope with energy dispersive X-ray analysis. XRD analysis confirmed the peak identification of Aluminium, SiC and B 4 C particulates in the (Al-MMCs) composites. The hardness values of the composites Al+6wt% SiC and Al+4wt%SiC+2wt%B 4 C were seen as 20.6% higher than those of pure aluminium matrix. Increase in the hardness of the composite was seen due to grain refinement and resistance to dislocation motion. The existence of SiC particles in Al matrix was seen having the ability to improve the hardness value of the composites. The addition of SiC and B 4 C reinforcements in the Al matrix alloy has the potential to greatly increase the compressive strength of the AMCs. The density of hybrid composites was seen having a major impact on the influence of SiC and B 4 C particulates. The wear resistance of the hybrid composites were examined under load range of 5 and 10 N, with sliding speed of 0.1 m/s. The synergistic effect of reinforcing particles was seen as assisting the improvement of wear resistance due to the relative concentration of SiC and B 4 C. The incorporation of SiC and B 4 C reinforcements into the Aluminium matrix hybrid composite can substantially increase the hardness, compressive strength, and wear resistance of the composites.

Synthesis and characterization of AA7075/SiC/graphene hybrid composite

Mechanical and Tribological Properties of Graphene-Reinforced Bimodal AA7075 Composites

Thermo-Mechanical, Tribological and Microstructural Properties of Aluminium AA8011/B4C/Graphene Based Hybrid Composites

Influence of Silicon Carbide Reinforcements on Mechanical and Wear Behaviour AA7075/15% wt. Glass fiber Hybrid Composites

Mechanical Characterization of Graphene Reinforced Al2024/Albite Hybrid Composites by Powder Metallurgy.

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Mechanical and wear analysis of AA6061-T6-SiC-TiC-graphite metal matrix composite

Investigation of aluminum-based mono and hybrid surface composites by incorporating SiC and graphene reinforcements using friction stir processing

WEAR PROPERTIES OF ALUMINUM MATRIX COMPOSITES REINFORCED BY GRAPHENE ENCAPSULATED SiC NANOPARTICLES

Effect of Microstructure on Mechanical Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles

Microstructural Behavior and Mechanical Properties of AA7010/Tic/Graphene Hybrid Nanocomposite Synthesized by Stir Casting

Mechanical and wear behavior of Al 7075/Al2O3/SiC/mg metal matrix nanocomposite by liquid state process

Investigation on the effect of SiC and TiB2 ceramic particles on mechanical and tribological properties of Al7075 hybrid metal matrix composites prepared through conventional stir casting technique

Influence of graphene nanoplates and titanium diboride particulate on wear and interfacial bonding properties of sintered aluminium alloy composites

Mechanical Characteristics and Wear Behaviour of Al/SiC and Al/SiC/B4C Hybrid Metal Matrix Composites Fabricated Through Powder Metallurgy Route

Micro-mechanical and tribological behavior of Al/SiC/B4C/CNT hybrid nanocomposite

Effect of Carbon in Fabrication Al-SiC Nanocomposites for Tribological Application

Synergistic effects of TiC and graphene on the microstructure and tribological properties of Al2024 matrix composites

SiC and MWCNT Blending Actions on Functional Performance of Hybrid AA2024 Alloy Nanocomposite Via Two Step Stir Cast Route

Tribological, mechanical and microstructure characteristics of hybrid aluminium matrix composite containing titanium carbide (TiC) and graphite particles

Mechanical Properties and Tribological Behavior of Al6061–SiC–Gr Self-Lubricating Hybrid Nanocomposites