Abstract:The predominant method for improving the mechanical characteristics of aluminum -lithium (Al-Li) alloys during laser welding is by regulating the transition from columnar crystals to equiaxed crystals. The transition is facilitated through the incorporation of TiC particles, which play a crucial role in augmenting the strength and toughness of the aluminum alloy. The inclusion of TiC particles offers a new opportunity to enhance the utilization of Al-Li alloys in laser welding procedures. The main aim of this study is to control the transition from columnar to equiaxed crystal structures by creating a TiC nanoparticle-reinforced aluminum alloy filler wire. This is intended to improve the properties of laser -welded joints. The study investigates the impact of different TiC particle contents on the microstructural characteristics. The presence of TiC particles is noted to enhance the transformation of columnar crystals into equiaxed crystals in the welded joints, resulting in a refined microstructure. The augmentation of particle content results in a notable reduction in the average grain size, decreasing from 78.25 mu m to 37.15 mu m. This alteration shifts the directional growth preference from specific crystallographic axes to a stochastic trajectory. Significantly, when the particle content reaches 0.6 wt%, remarkable enhancements in both tensile strength and elongation are evident, resulting in an ultimate tensile strength of 318 MPa and an elongation of 4.8 %. The dispersed configuration of TiC particles plays a pivotal role in hindering the movement of dislocations, consequently increasing the energy necessary for this mechanism. Moreover, the existence of these particles at grain boundaries impedes the propagation of cracks by altering the direction of the crack path, absorbing additional energy, and consequently improving toughness. An evident pattern emerges when examining higher particle concentrations, indicating that a decrease in ultimate tensile strength is concomitant with an increase in elongation.

Effects of Nano-Modification on the Microstructural Evolution and Mechanical Properties of AA7075/AA6061 Aluminum Alloy Joints Fabricated by Laser-Mig Hybrid Welding Technique

Controlling the Columnar-to-equiaxed Transition and Crack Propagation Behavior of Laser Welded Al-Li Alloy Reinforced with TiC Nanoparticles

Microstructure Evolution and Fracture Behavior of 2060 AlLi Alloy by Laser Welding with TiC Nanoparticle-Reinforced Filling Wire

Effects of Pre‐Placed Nano‐TiC Powder on the Performance of Steel/Aluminum Laser Welded Joints

Microstructure evolution and fracture behavior of 2060 Al Li alloy by laser welding with TiC nanoparticle-reinforced filling wire

Effect of Tungsten Mesh Interlayer on Microstructure and Mechanical Performance of A6061/Ti6Al4V Dissimilar Joints

Formation, microstructure, and performance of laser-welded 6061 Al alloy joint with Ti3AlC2 additive

Microstructure and mechanical properties of TiC nanoparticles reinforced 7075 aluminium alloy fabricated by oscillating laser-arc hybrid additive manufacturing

The Influences of Nanoparticles on the Microstructure Evolution Mechanism and Mechanical Properties of Laser Welded Stainless Steel/aluminum

Analyzing the Influence of Titanium Content in 5087 Aluminum Filler Wires on Metal Inert Gas Welding Joints of AA5083 Alloy

Effect of TiC/TiC–TiB2 on Microstructure and Mechanical Properties of Spray Formed 7055 Aluminum Alloy TIG Welded Joints

Insights into the Influences of Nanoparticles on Microstructure Evolution Mechanism and Mechanical Properties of Friction-Stir-welded Al 6061 Alloys

Modifying Microstructures and Mechanical Properties of Laser-Arc Welded Joints of Dissimilar Advanced Aluminum Alloys

7075 Aluminum Alloy Welded by Laser-Tig Hybrid with Homogeneous Filler Wire: Microstructure Evaluation and Molten Pool Behavior

New insight into microstructure and mechanical properties of heterostructures 7075 Al joint prepared via single mode laser welding

Microstructure Evolution and Crack Prevention in TiC Nanoparticles-Enhanced 2195 Al Li Alloy Joint Fabricated by Coaxial Fiber-Diode Hybrid Laser Wire-Feeding Welding

Microstructure and Mechanical Properties of Laser-Mig Hybrid Welding of 1420 AlLi Alloy

Research on Technology of 7075 Aluminum Alloy Processed by Variable Polarity TIG Additive Manufacturing Utilizing Nanoparticle-Reinforced Welding Wire with TiB2

A Comparative Study of Microstructure and Tensile Properties of Ti2AlNb Joints Prepared by Laser Welding and Laser-Additive Welding with the Addition of Filler Powder

Microstructure and Properties of 6063/ti3al2.5v Dissimilar Alloys Joint with Laser Welding

Improved strength and ductility on laser beam welded joints of 7085Al matrix nanocomposites by in-situ ZrB 2 nanoparticles and Al 3 (Er, Zr) nanoprecipitates