Abstract:The predominant method for improving the mechanical characteristics of aluminum -lithium (Al-Li) alloys during laser welding is by regulating the transition from columnar crystals to equiaxed crystals. The transition is facilitated through the incorporation of TiC particles, which play a crucial role in augmenting the strength and toughness of the aluminum alloy. The inclusion of TiC particles offers a new opportunity to enhance the utilization of Al-Li alloys in laser welding procedures. The main aim of this study is to control the transition from columnar to equiaxed crystal structures by creating a TiC nanoparticle-reinforced aluminum alloy filler wire. This is intended to improve the properties of laser -welded joints. The study investigates the impact of different TiC particle contents on the microstructural characteristics. The presence of TiC particles is noted to enhance the transformation of columnar crystals into equiaxed crystals in the welded joints, resulting in a refined microstructure. The augmentation of particle content results in a notable reduction in the average grain size, decreasing from 78.25 mu m to 37.15 mu m. This alteration shifts the directional growth preference from specific crystallographic axes to a stochastic trajectory. Significantly, when the particle content reaches 0.6 wt%, remarkable enhancements in both tensile strength and elongation are evident, resulting in an ultimate tensile strength of 318 MPa and an elongation of 4.8 %. The dispersed configuration of TiC particles plays a pivotal role in hindering the movement of dislocations, consequently increasing the energy necessary for this mechanism. Moreover, the existence of these particles at grain boundaries impedes the propagation of cracks by altering the direction of the crack path, absorbing additional energy, and consequently improving toughness. An evident pattern emerges when examining higher particle concentrations, indicating that a decrease in ultimate tensile strength is concomitant with an increase in elongation.

Effects of Pre‐Placed Nano‐TiC Powder on the Performance of Steel/Aluminum Laser Welded Joints

Effects of Nano-Modification on the Microstructural Evolution and Mechanical Properties of AA7075/AA6061 Aluminum Alloy Joints Fabricated by Laser-Mig Hybrid Welding Technique

Controlling the Columnar-to-equiaxed Transition and Crack Propagation Behavior of Laser Welded Al-Li Alloy Reinforced with TiC Nanoparticles

Formation, microstructure, and performance of laser-welded 6061 Al alloy joint with Ti3AlC2 additive

Effect of Tungsten Mesh Interlayer on Microstructure and Mechanical Performance of A6061/Ti6Al4V Dissimilar Joints

Effect of adding Nb foil on joint properties of laser fusion welding for TC4 titanium and 7075 aluminum alloy

Dissimilar joining of low-carbon steel to aluminum alloy with TiC particles added in a zero-gap lap joint configuration by laser welding

Microstructure, Corrosion and Mechanical Properties of TiC Particles/Al-5Mg Composite Fillers for Tungsten Arc Welding of 5083 Aluminum Alloy

Microstructure Evolution and Crack Prevention in TiC Nanoparticles-Enhanced 2195 Al Li Alloy Joint Fabricated by Coaxial Fiber-Diode Hybrid Laser Wire-Feeding Welding

Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer

Dual Beam Laser Fusion-Brazed Ti6Al4V/AA7075 Dissimilar Lap Joint: Crack Inhibition Via Inoculation with TiC Nanoparticles

Analyzing the Influence of Titanium Content in 5087 Aluminum Filler Wires on Metal Inert Gas Welding Joints of AA5083 Alloy

Effects of Laser Power on the Interfacial Intermetallic Compounds and Mechanical Properties of Dual-Spot Laser Welded–brazed Ti/Al Butt Joint

Study on Laser Overlap Welding of Titanium/Aluminum Dissimilar Metals Based on Niobium Microalloying

Effects of laser power on the microstructural evolution and mechanical performance in laser dissimilar welding of TC4 to SiCp/6092Al composite

Simultaneously enhanced strength and toughness of cast medium carbon steels matrix composites by trace nano-sized TiC particles

A Comparative Study of Microstructure and Tensile Properties of Ti2AlNb Joints Prepared by Laser Welding and Laser-Additive Welding with the Addition of Filler Powder

Improvement in Microstructure and High-Temperature Brittleness of Laser-Welded Ti-22Al-25Nb Joints with the Addition of TiB2 Powder

Microstructure and Mechanical Properties of Welding–brazing of Ti/Al Butt Joints with Laser Melting Deposition Layer Additive

Improvement of microstructure and mechanical properties of dissimilar friction stir welded aluminum/titanium joints via aluminum oxide nanopowder

Microstructure Characteristics and Mechanical Properties of γ-TiAl/Steel Joints with Different Laser Pulse Currents