Abstract:<p>The large strength difference between hard and soft components in heterogeneous structured materials leads to the evolution of high back-stress hardening, which increases the strength and ductility of materials simultaneously. Moreover, the combination of high shear strain and elevated temperature allows an increase in the strength of low-melting temperature metallic alloys by grain refinement, solute migration, and clustering. In this study, to design a new heterogeneous microstructure in the aluminum alloy, both room temperature (RT) and high-temperature (HT) ultrasonic nanocrystalline surface modification (UNSM) were conducted, and their mechanical properties and microstructural evolutions were investigated. The large shear strain from the UNSM treatment reduces the grain size at the sample surface and creates a gradient structure. The combination of shear strain and elevated temperature during UNSM treatment induces solute migration at a certain depth of the specimens, resulting in the nano-sized Mg-rich particles at the surface region. Both grain refinement and precipitation at the surface region of the HT sample provide strong back-stress hardening in the early stages of deformation that enhances the strength and ductility of materials. Therefore, a high shear strain and control of processing temperature allow the design of a unique heterogeneous microstructure in low-melting temperature metallic alloys, which is a good strategy for enhancing the mechanical properties of sheet or thin metallic products.</p>

Microstructural Refinement of Al-Si Alloy Upon Ultrasonic Nanocrystalline Surface Modification Treatment

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Characterization of the Nano-Scale Surface Layer of a Tempered Martensitic Steel Synthesized by Ultrasonic Nanocrystalline Surface Modification Treatment

Effect of Ultrasonic Nanocrytalline Surface Modification on the Microstructural Evolution of Inconel 690 Alloy

Effect of Ultrasonic Nanocrytalline Surface Modification on Hardness and Microstructural Evolution of Cu-Sn Alloy

Effects of Ultrasonic Stirring on Microstructures of Al 7wt%Si Alloy Ingot

Mechanical property enhancement in gradient structured aluminum alloy by ultrasonic nanocrystalline surface modification

Investigation of Grain Refinement and Mechanical Properties of Al-7Si Alloy with Al-5Nb-1B Master Alloy Addition Treated by Ultrasound Treatment

Surface Nanocrystallization of Mg-3 Wt.% Li-6 Wt.% Al Alloy by Surface Mechanical Attrition Treatment

Effect of ultrasonic melt processing and Al-Ti-B on the microstructural refinement of recycled Al alloys

The Effect of Solution Treatment on the Si Particles’ Morphology Evolution and the Thermal Conductivity and Tensile Properties of Sb-Modified Al-8Si-0.6Mg Alloys

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Processing aluminum alloy with hybrid wire arc additive manufacturing and ultrasonic nanocrystalline surface modification to improve porosity, surface finish, and hardness

Microstructure and mechanical properties of CoCrFeMnNi high entropy alloy with ultrasonic nanocrystal surface modification process

Microstructural evolution of AZ31 Mg alloy with surface mechanical attrition treatment: Grain and texture gradient

3D Characterization of a Nanostructured Al-Cu-Mg Alloy

Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification

Solidification microstructure manipulation mechanism of hypoeutectic and hypereutectic Al-Si alloys controlled by trace in-situ nano-Fe 2 B and nano-Fe 3 Si

Fabrication of a Gradient Nano-/Micro-structured Surface Layer on an Al–Si Casting Alloy by Means of Ultrasonic–Electropulsing Coupling Rolling Process

Effect of Electropulsing-Assisted Ultrasonic Nanocrystalline Surface Modification on the Surface Mechanical Properties and Microstructure of Ti-6Al-4V Alloy

Microstructure Characteristics of A356 Nanocomposites Manufactured via Ultrasonic Cavitation Processing Under Controlled Solidification Conditions