Abstract:Aspheric thin-walled crucibles with large diameters are widely used for photovoltaics and semiconductor industries, while they have hard-brittle and aspheric characteristics. Nevertheless, these crucibles strictly require atomic surfaces and high material removal rate (MRR). This is a challenge for chemical mechanical polishing (CMP). To break this challenge, a novel green CMP was developed for fused silica, containing ceria, lanthana, hydrogen peroxide, diethylene triaminepentaacetic acid pentasodium, carboxymethyl cellulose sodium and guanidine carbonate. After CMP, surface roughness Ra of 0.115 is obtained at a scanning area of 5 × 5 μm2 measured by atomic force microscopy, and MRR is 563 nm/min. In such an atomic surface, the MRR is the highest compared with those published previously. Transmission electron microscopy confirms that the thickness of damaged layer after CMP is only 2.63 nm. A novel approach of robot floating polishing is proposed for aspheric crucibles with a diameter of 810 mm and a height of 580 mm. Using the developed CMP, surface roughness Sa of 0.178 nm on inner surface of an aspheric thin-walled crucible is achieved under a measurement area of 50 × 50 μm2. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance reveal that the content of Ce3+ increased from 28.54 to 43.76 %. Through Raman, XPS and Fourier transform infrared spectroscopy, CMP mechanisms are elucidated. Densified damaged layer on the surface of fused silica was induced by the transformation of surface structure from six-membered to four- or three-membered network. Ce-OH and Si-OH were formed between fused silica and ceria abrasives, forming Ce-O-Si by condensation reaction of dehydration. The developed green CMP and approach provide new pathway to polish and manufacture atomic surfaces for aspheric thin-walled crucibles with large diameters.

A novel atomic removal model for chemical mechanical polishing using developed mesoporous shell/core abrasives based on molecular dynamics

Development of core–shell SiO 2 @A-TiO 2 abrasives and novel photocatalytic chemical machinal polishing for atomic surface of fused silica

Preparation of Ordered Mesoporous Si02/Mc N anocomposite Abrasives and Their Chemical Polishing Behavior on Fused Silicon Substrates

Novel green chemical mechanical polishing for an aluminum alloy and mechanisms interpreted by molecular dynamics simulations and measurements

Novel green chemical mechanical polishing of fused silica through designing synergistic CeO 2 /h-BN abrasives with lubricity

Non-spherical abrasives with ordered mesoporous structures for chemical mechanical polishing

Non-continuum Material Removal Mechanism of Surface Polishing with Ultra Precision

Preparation of alumina/silica core-shell abrasives and their CMP behavior

XPS, UV–vis Spectroscopy and AFM Studies on Removal Mechanisms of Si-face SiC Wafer Chemical Mechanical Polishing (CMP)

Preparation of Γ‐alumina/silica Core–shell Abrasives and Their Chemical Mechanical Polishing Performances on Sapphire Substrates

A chemical mechanical polishing model incorporating both the chemical and mechanical effects

Atomistic Mechanisms of Si Chemical Mechanical Polishing in Aqueous H2O2: ReaxFF Reactive Molecular Dynamics Simulations

Mechanical Model of Nanoparticles for Material Removal in Chemical Mechanical Polishing Process

Reactive Molecular Dynamics Simulation of Si Chemical Mechanical Polishing Process

Molecular Modeling of the Mechanical Effect in the Chemical Mechanical Polishing Process

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

A Chemical Mechanical Polishing Model Based on the Viscous Flow of the Amorphous Layer

Preparation of Silane Modified Sio2 Abrasive Particles and Their Chemical Mechanical Polishing (cmp) Performances

Atomic surface induced by novel green chemical mechanical polishing for aspheric thin-walled crucibles with large diameters

Preparation of three-dimensional dendritic-like mesoporous silica particles and their pore size-dependent polishing behavior and mechanism

Mechanical Model of Single Abrasive During Chemical Mechanical Polishing: Molecular Dynamics Simulation