Abstract:Eutectic high entropy alloys are noted for their excellent castability and comprehensive mechanical properties. The excellent mechanical properties are closely related to the activation and evolution of deformation mechanisms at the atomic scale. In this work, AlCoCrFeNi 2.1 alloy is taken as the research object. The mechanical behaviors and deformation mechanisms of the FCC and B2 single crystals with different orientations and the FCC/B2 composites with K-S orientation relationship during nanoindentation processes are systematically studied by molecular dynamics simulations. The results show that the mechanical behaviors of FCC single crystals are significantly orientation-dependent, meanwhile, the indentation force of [110] single crystal is the lowest at the elastic–plastic transition point, and that for [100] single crystal is the lowest in plastic deformation stage. Compared with FCC, the stress for B2 single crystals at the elastic–plastic transition point is higher. However, more deformation systems such as stacking faults, twins and dislocation loops are activated in FCC single crystal during the plastic deformation process, resulting in higher indentation force. For composites, the flow stress increases with the increase of B2 phase thickness during the initial stage of deformation. When indenter penetrates heterogeneous interface, the significantly increased deformation system in FCC phase leads to a significant increase in indentation force. The mechanical behaviors and deformation mechanisms depend on the component single crystal. When the thickness of the component layer is less than 15 nm, the heterogeneous interfaces fail to prevent the dislocation slip and improve the indentation force. The results will enrich the plastic deformation mechanisms of multi-principal eutectic alloys and provide guidance for the design of nanocrystalline metallic materials.

In situ SEM characterization of tensile behavior of nano-fibrous Al–Si and Al–Si–Sr eutectics

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

In-situ Study of Microstructural Evolution and Local Strain Distribution During Tensile Loading of Near-Micrometre Grain Size Aluminium

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests

Two Directional Microstructure and Effects of Nanoscale Dispersed Si Particles on Microhardness and Tensile Properties of AlSi7Mg Melt-Spun Alloy

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Atomistic Simulations of Dislocation Activity in Si Nanofibers in Al-Si Eutectics

Enabling plastic co-deformation of disparate phases in a laser rapid solidified Sr-modified Al-Si eutectic through partial-dislocation-mediated-plasticity in Si

In situ EBSD study of formation and propagation of deformation bands in a single-crystal superalloy during tensile deformation

In-situ SEM Investigation on Fatigue Behaviors of Additive Manufactured Al-Si10-Mg Alloy at Elevated Temperature

In-Situ Observation of Ni-11.5wt%Si Eutectic Microstructure Evolution and Exploration of Strengthening Mode of Ni-Ni3si Eutectic Composites

Crystallography and Interface Structures in As-Arc Melted and Laser Surface-Remelted Aluminum–Silicon Alloys with and without Strontium Addition

Al-Si nano clusters and short-range orders induced fibrous modified eutectic Si

Three-dimensional morphology of an ultrafine Al-Si eutectic produced via laser rapid solidification

Investigating the microstructural evolution during deformation of laser additive manufactured Ti–6Al–4V at 400 °C using in-situ EBSD

In Situ Electron Backscatter Diffraction Study of Deformation Inhomogeneity under Uniaxial Tension of Laser Melting Deposited TA15 Alloy

In-situ EBSD investigation of the effect of orientation on plastic deformation behavior of a single crystal superalloy

In-situ surface study on the mechanism of high-strain-rate superplasticity in an Al–Cu–Li alloy

Molecular Dynamics Simulations of Micromechanical Behaviours for AlCoCrFeNi2.1 High Entropy Alloy during Nanoindentation