Abstract:In this paper, we study the deformation behavior of nickel-based superalloys by in-situ EBSD and uniaxial tensile tests. This study mainly focuses on the microstructure evolution in the same area of the sample during deformation, including the evolution of various types of grain boundaries, geometrically necessary dislocations, grain orientations and texture, and their effect on the mechanical properties. The results show that the rotation of grains is closely related to their initial orientation during deformation. The lattice of grain is rotated to a certain extent to accommodate the more favorable orientation under low strain, leading to higher Schmid factors for the sample. Under large stresses, the grains occur deformation, multiple slip systems start simultaneously or alternately and the Schmid factors value gradually tends to stabilize at a lower level. Meanwhile, the texture orientation density of the initial Rotating cubic {001} texture, α-fiber (RD// ) texture, and γ-fiber (ND // ) gradually decrease or even disappears, while the texture orientation density of Copper {112} and Goss {011} increases during uniaxial tensile deformation for Cr20Ni80 alloy. Grain rotation may be a result of large strain due to stress triaxiality and resulting plane stress condition owing to specimen dimension, which is beneficial to improve the plastic deformability of the alloy. Interestingly, with the increase of strain, the average misorientation angle first decreases and then increases, which is associated with the dislocation density. In addition, serious torsion occurs in the grains during this process, forming a large number of substructures. These substructures result in grain refinement and the Hall-Petch effect. In fact, during the deformation process, multiple strengthening mechanisms act in coordination, leading to an increase in the strength of the alloy.

In situ EBSD study of formation and propagation of deformation bands in a single-crystal superalloy during tensile deformation

In-situ EBSD investigation of the effect of orientation on plastic deformation behavior of a single crystal superalloy

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests

The Study of Tension/Compression Asymmetry of [111] Oriented Nickel Base Single Crystal Superalloys

Microstructure Characterization and Damage Coupled Constitutive Modeling of Nickel-Based Single-Crystal Alloy with Different Orientations

Ultrasonic Nonlinear Evaluation of Tensile Plastic Damage in Nickel Based Single Crystal Superalloy

Atomic Simulation of the Effect of Orientation on Tensile/compressive Properties in Nickel-Based Single Crystal Superalloys

Tensile deformation dominated by matrix dislocations at intermediate temperatures revealed using in-situ EBSD in superalloys

In-situ Observation of Ni-Co Based Wrought Superalloy High-Temperature Deformation: Lattice Rotation and Grain Boundary Response

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Nanoindentation Study and Mechanical Property Analysis of Nickel-Based Single Crystal Superalloys

Deformation Localization in a Single Crystal Nickel-Based Superalloy Oriented for Multiple Slip

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

The Tension/compression Asymmetry of a High Γ′ Volume Fraction Nickel-based Single-Crystal Superalloy

EBSD Study of Strain Dependent Microstructure Evolution During Hot Deformation of a Typical Nickel-Based Superalloy

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Effect of orientations on in situ tensile deformation and fracture behaviours of nickel-base single-crystal superalloys

Systematical Analysis on the Grain Orientation Evolution of Pure Nickel under Plastic Deformation by Using In-Situ EBSD

Effect of the Grain Size on the Microtensile Deformation and Fracture Behaviors of a Nickel-Based Superalloy Via EBSD and In-Situ Synchrotron Radiation X-ray Tomography

Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation