Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

Study of the Influence of An Aluminum Oxide Additive on the Physical and Chemical Properties of ZrO2 Xerogels, Powders, and Ceramics

Cubic Yttria Stabilized Zirconia Sintering Additive Impacts: A Comparative Study

The effect of additives on the properties of ZrO2 stabilized with calcia and magnesia

The influence of zirconium dioxide nanoadditives on the properties of mullite-corundum

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Interaction of Copper Oxide with Zirconium Dioxide Stabilized with Yttrium Oxide

Preparation of Zirconia Powders by Sol-gel Process

Comparative analyses of the IV group oxides additives influence on the sintering kinetics of zirconia nanopowders

Reaction sintering of ZrSiO4/α-Al2O3 mixed powders with Y2O3 addition

Role of t-ZrO2 stabilization methods in phase composition, structure and properties of ZTA ceramics

Effect of Al2O3on the Process Performance of ZrO2Microspheres

Al2O3 AND ZrO2 CERAMIC MATERIALS OBTAINED BY SOL-GEL METHOD

Influence of a small amount of Al2O3 addition on the transformation of Y2O3-partially stabilized ZrO2 during annealing

The Effect of the Additive to the Thermal Shock Resistance of Zirconia

The Study on Degradation of Y<sub>2</sub>O<sub>3</sub>-CeO<sub>2</sub>-Partially Stabilized ZrO<sub>2</sub> Adding Al<sub>2</sub>O<sub>3</sub> Particles at Low Temperature

Modification of Basic Refractory Structure by Zirconium Dioxide Nanoparticles

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium

The Effect of Nano-Al<sub>2</sub>O<sub>3</sub> on Sintering Behavior and Mechanical Property of ZrO<sub>2</sub> Ceramics

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

Effect of MgO addition on properties of reaction-sintered ZrO2-toughened Al2O3 multiphase ceramic

Preparation and Performance for Zirconia/Alumina Composite Ceramics