Abstract:Reducing the residual stresses and improving the mechanical strength of large-scale ceramic/metal brazing joints is an important problem that must be solved for its practical engineering application. Using composite filler with solid-state phase transformation ceramic particulates, it is theoretically feasible to relieve the residual stress and improve the mechanical properties of ceramic/metal brazed joints. In this study, Cu mesh, Ag-28Cu-2Ti (wt.%), and yttria-stabilized zirconia (0.6 mol.% YSZ solid-state phase transformation ceramic particulates) composite power fillers were used in the brazing of Ti3SiC2 ceramic and pure copper. The microstructure of joints and YSZ particulates in the interface was investigated and confirmed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), scanning transmission electron microscopy (STEM), and transmission electron microscopy (TEM). In addition, the effect of YSZ particulates content on the mechanical properties of joints was investigated and evaluated by the shear strength. The results show that the interfacial phases were mainly Ti5Si3, TiC, TixCu, Ag (s, s), Cu (s, s), and YSZ particulates. Moreover, most of YSZ particulates undergo the solid-state phase transformation from tetragonal zirconia (t-ZrO2) to monoclinic zirconia (m-ZrO2) during the cooling process of brazing. The abnormal volume expansion of the solid-state phase transformation reduced the thermal mismatch between Ti3SiC2 ceramic and filler, thereby reducing the residual stress in the interface of joint. When using composite filler with 6 wt.% YSZ particulates, the shear strength of Ti3SiC2/Cu joint reached the maximum. The maximum average shear strength of the joints was 80.2 MPa, which was about 103.6% more than the joint without YSZ particulates.

Rare earth oxide CeO2 enhanced reactive air brazing of YSZ ceramics

Reactive air brazing of YSZ ceramic with novel Al2O3 nanoparticles reinforced Ag-CuO-Al2O3 composite filler: Microstructure and joint properties

Brazing YSZ ceramics by a novel SiO2 nanoparticles modified Ag filler

Reactive Air Brazing of Ysz-Electrolyte and Al2o3-Substrate for Gas Sensor Sealing: Interfacial Microstructure and Mechanical Properties

Evolution of microstructure and properties in reactive air brazing of 3YSZ ceramic and aluminized Crofer22h stainless steel using Pd-modified Ag–CuO filler

A Novel Ag–CuAlO2 Sealant for Reactive Air Brazing of 3YSZ and AISI 310S

Fabrication and Characterization of CeO2-Doped Yttria-Stabilized ZrO2 Composite Particles

Reactive Air Brazing of the YSZ/AISI 310s Couples Using a Novel Ag–Nb2O5 Sealant

Brazing ZTA Ceramic and Ti6Al4V Alloy Directly in Air: Excellent Oxidation Resistance at 800 °C

Wetting and Brazing of YIG Ceramics Using Ag–CuO–TiO2 Metal Filler

Effect of doping CeO2 and Sc2O3 on structure, thermal properties and sintering resistance of YSZ

Improvement for Ti 3 SiC 2 /Cu joint brazed using composite fillers with abnormal expansion ceramic particulates

Joining 3YSZ Electrolyte to AISI 441 Interconnect Using the Ag Particle Interlayer: Enhanced Mechanical and Aging Properties

Microstructures and Mechanical Properties of Al2O3/YAG:Ce3+ Eutectics with Different Ce3+ Concentrations Grown by HDS Method

Reactive Air Brazing of Al2O3 Ceramic with Ag-CuO-Pt Composite Fillers: Microstructure and Joint Properties

Solid-state Transformation Composite Filler: A New Strategy to Strengthen Ceramic/metal Joint

Ag–SiO2 - an Optimized Braze for Robust Joining of Commercial Coated Stainless Steel to Ceramic Solid Oxide Cells

Improvement for Ti3SiC2/Cu Joint Brazed Using Composite Fillers with Abnormal Expansion Ceramic Particulates

Evolution Behavior of Al 2 O 3 Nanoparticles Reinforcements During Reactive Air Brazing and Its Role in Improving the Joint Strength

Joining of Yttria Stabilised Zirconia to Ti6Al4V Alloy Using Novel CuO Nanostructure Reinforced Cu Foam Interlayer

Electrochemically driven rapid wetting of 3YSZ by 60Cu–40Ag and its robust joining to 304 stainless steel