Abstract:This study proposes a method to enhance the airtightness of the joint between the ZrO2 and Crofer alloy using coating technology. With the aid of vacuum sputtering technology, a titanium-copper alloy layer with a thickness between 1.5 μm and 6 μm was first deposited on the surface of ZrO2 and Crofer, respectively. The chemical composition of the deposited reaction layer was 70.2 Cu and 29.8 Ti in at%. Then, using silver as the base material in the reactive air brazing (RAB) process, we explore the use of this material design to improve the microstructure and reaction mechanism of the joint surface between ceramics and metal, compare the effects of different pretreatment thicknesses on the microstructure, and evaluate its effectiveness through air tightness tests. The results show that a coating of Cu-Ti alloy on the ZrO2 substrate can significantly improve bonding between the Ag filler and ZrO2. The Cu-Ti metallization layer on the ZrO2 substrate is beneficial to the RAB. After the brazing process, the coated Cu-Ti layers form suitable reaction interfaces between the filler, the metal, the filler, and the ceramic. In terms of coating layer thickness, the optimized 3 μm coated Cu-Ti alloy layer is achieved from the experiment. Melting and dissolving the Cu-Ti coated layer into the ZrO2 substrate results in a defect-free interface between the Ag-rich braze and the ZrO2. The air tightness test result shows no leakage under 2 psig at room temperature for 28 h. The pressure condition can still be maintained even under high-temperature conditions of 600 °C for 24 h.

Evolution of microstructure and properties in reactive air brazing of 3YSZ ceramic and aluminized Crofer22h stainless steel using Pd-modified Ag–CuO filler

Reactive Air Brazing of Al2O3 Ceramic with Ag-CuO-Pt Composite Fillers: Microstructure and Joint Properties

Reactive air brazing of YSZ ceramic with novel Al2O3 nanoparticles reinforced Ag-CuO-Al2O3 composite filler: Microstructure and joint properties

Evolution Behavior of Al 2 O 3 Nanoparticles Reinforcements During Reactive Air Brazing and Its Role in Improving the Joint Strength

Microstructure evolution and mechanical properties of ZrO 2 /TiAl joints vacuum brazed by Ag–Cu filler metal

Study on Reactive Air Brazing of P-Sio2 Ceramic with Ag-xCuO Filler Metal

Interfacial microstructure and mechanical properties of joints between ZrO 2 ceramic and 316 stainless steel brazed using Ag–Cu–In–Ti filler

Reactive Air Brazing of Ysz-Electrolyte and Al2o3-Substrate for Gas Sensor Sealing: Interfacial Microstructure and Mechanical Properties

Brazing ZrO2 Ceramic and TC4 Alloy by Novel WB Reinforced Ag-Cu Composite Filler: Microstructure and Properties

Reactive Air Brazing of TiAl Alloy Using Ag-CuO: Microstructure and Joint Properties

Microstructure and Mechanical Properties of Al2O3/Cu Joints Brazed with Ag–Cu–Ti+Zn Composite Fillers

Microstructure Evolution and Mechanical Properties of Co Coated AISI 441 Ferritic Stainless Steel/ysz Reactive Air Brazed Joint

Effects of Ti Thickness on Microstructure and Mechanical Properties of Alumina-Kovar Joints Brazed with Ag-Pd/Ti Filler

Zirconia and Crofer Joint Made by Reactive Air Brazing Using the Silver Base Paste and Cu-Ti Coating Layer

A Novel Ag–CuAlO2 Sealant for Reactive Air Brazing of 3YSZ and AISI 310S

Interfacial Reaction Behavior and Mechanical Characterization of ZrO2/TC4 Joint Brazed by Ag–Cu Filler Metal

Effect of brazing temperature on interfacial microstructure and mechanical property of Ti60/AgCu/ZrO2 joint

Brazing ZTA Ceramic and Ti6Al4V Alloy Directly in Air: Excellent Oxidation Resistance at 800 °C

Microstructure and Mechanical Properties of Al2O3 Ceramic Joints Achieved by Ag‐SiO2 Braze in Air

Microstructure and Performance of the Cu/Al2O3 Joint Brazed with Active Composite Filler

Interfacial microstructure and mechanical properties of porous-Si3N4 ceramic and TiAl alloy joints vacuum brazed with AgCu filler