Abstract:The deformation mechanism and mechanical properties of CoCrFeNi high-entropy alloys (HEA) processed by room-temperature rolling (RTR), cryorolling (CR) and asymmetric cryorolling (ACR) were studied. As the rolling reduction increased from 20 % to 80 %, a transition in the dislocation and twinning deformation mechanisms occurred. The cryogenic environment in rolling process can promote the activation of the twins in the HEA at a lower strain, improving the deformation efficiency. The introduction of differential speed ratio led to the finer micro-shear bands with a more uniform distribution, so that the grains were refined to a greater extent. In the ACR HEA after large deformation , the stacking faults accumulated inside the deformation twins further refined the twins along the direction of long axis. This increased the strength of ACR HEA together with Lomer-Cottrell locks and FCC/HCP boundaries, reaching the maximum value compared with CR and RTR. The ultimate tensile strength exceeded 1450 MPa, and the yield strength of ACR HEA increased by nearly 1200 MPa compared to the initial material, while it still maintained the same elongation as RTR and CR. ACR showed the best strength-ductility combination during the whole rolling deformation process. The microstructure evolution and the strengthening contribution mechanism of different rolling were discussed and calculated, and the specific mechanism of how the introduced differential speed ratio further improves the strength-ductility synergistic strengthening in CR was clarified.

Microstructure and mechanical properties of high entropy CrMnFeCoNi alloy processed by electopulsing-assisted ultrasonic surface rolling

Microstructure and mechanical properties of CoCrFeMnNi high entropy alloy with ultrasonic nanocrystal surface modification process

Evolution of surface mechanical properties and microstructure of Ti-6Al-4V alloy induced by electropulsing-assisted ultrasonic surface rolling process

Microstructure and Mechanical Properties Evolution of the Al, C-Containing CoCrFeNiMn-Type High-Entropy Alloy during Cold Rolling

Deformation mechanism and mechanical properties of a CoCrFeNi high-entropy alloy via room-temperature rolling, cryorolling, and asymmetric cryorolling

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Enhanced Forming Accuracy and Mechanical Property of CoCrFeMnNi High Entropy Alloy by Ultrasonic and Cryogenic Fields-Assisted Deformation

Microstructure evolution and mechanical properties of CoCrFeNiAl0.3 high entropy alloy produced by ball milling in combination with thermomechanical consolidation

Microstructure evolution and composition redistribution of FeCoNiCrMn high entropy alloy under extreme plastic deformation

Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy

Effect of Electropulsing on Surface Mechanical Behavior and Microstructural Evolution of Inconel 718 During Ultrasonic Surface Rolling Process

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Ultrasonic Vibration-Assisted Surface Plastic Deformation of a CrCoNi Medium Entropy Alloy: Microstructure Evolution and Mechanical Response

Ultrasonic provoked network-like intragrain carbide precipitations strengthen and ductilize a C-doped CoCrNi medium entropy alloy

Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys

Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Microstructure and Tensile Properties of Al0.5CoCrCuFeNi Alloys Produced by Simple Rolling and Annealing

Annealing-induced multi-heterogeneous microstructure strengthening in FeCoCrNiMo 0.2 high-entropy alloys

Microstructure and mechanical properties of CoCrFeNiW high entropy alloys reinforced by μ phase particles

Effects of cold rolling and annealing treatment on microstructure and properties of CoFeNiMnV high‐entropy alloys

Effect of ultrasonic surface rolling process on microstructure and properties of rolled Mg-Y-Nd-Zr alloy