Abstract:High-density dislocations and nano-twinning are known to significantly influence the work hardening ability of materials, presenting a potent approach for enhancing their overall strength. Here, a superior tensile strength-ductility synergy in a FeCoCrNiMo0.2 high entropy alloy (HEA) with high density dislocation and nano-twinning was achieved by employing cryo-rolling followed by subsequent annealing. Through electron microscope observation, the effects of geometrically necessary dislocation density and nano-twinning on tensile strength and plasticity are elucidated. The microstructure analysis reveals a substantial presence of dislocations and nano-twinning within the deformed grains following short-time annealing at 600 °C and 800 °C. The strategic presence of nano-twins serves as effective impediments to dislocation slip, resulting in the storage of dislocations within the grains, which contributes to the alloy's superior strength-ductility synergy and remarkable work hardening ability. Impressively, the obtained tensile strength-ductility matching exhibits yield strength and ductility values of 992.1 MPa/0.19 and 719 MPa/0.39, respectively. Upon increasing the annealing temperature to 1000 °C, high-density annealing twins emerge in the recrystallized grains, accompanied by a concomitant reduction in the geometrically necessary dislocation density due to dislocation rearrangement and annihilation. Furthermore, a small amount of topological close-packed (TCP) phase and L12 phase precipitation during annealing are observed, contributing to increased work hardening ability of the alloy. The findings underscore the importance of microstructural engineering as a valuable strategy for optimizing the mechanical properties of HEAs with a face-centered cubic structure.

Deformation mechanism and mechanical properties of a CoCrFeNi high-entropy alloy via room-temperature rolling, cryorolling, and asymmetric cryorolling

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Microstructure and Properties of Bulk Al0.5CoCrFeNi High-Entropy Alloy by Cold Rolling and Subsequent Annealing

Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys

Enhanced Strengthening Effect Via Nano-Twinning in Cryo-Rolled FeCoCrNiMo0.2 High-Entropy Alloys

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Strength-ductility Synergy of Al0.3CoCrFeNiCu High-Entropy Alloy Via Cold Rolling and Subsequent Annealing

Heterogeneous precipitation mediated heterogeneous nanostructure enhances strength-ductility synergy in severely cryo-rolled and annealed CoCrFeNi2.1Nb0.2 high entropy alloy

Effects of Warm-Rolling and Annealing on the Microstructure and Mechanical Properties of Dual-Phase Al0.45CoCrFeNiTi0.25 High-Entropy Alloy

Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing

Microstructure and Mechanical Properties Evolution of the Al, C-Containing CoCrFeNiMn-Type High-Entropy Alloy during Cold Rolling

Strengthening of High-Entropy Alloys Via Modulation of Cryo-Pre-straining-induced Defects

Severe warm-rolling mediated microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy: A comparison with cold-rolling

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Preparation of high-mechanical-property medium-entropy CrCoNi alloy by asymmetric cryorolling

Mechanical property enhancement and microstructure evolution of an Al-Cu-Li alloy via rolling at different temperatures

Effects of cold rolling and annealing treatment on microstructure and properties of CoFeNiMnV high‐entropy alloys

Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling

Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement

Excellent mechanical properties and strengthening mechanisms in ultrathin foils of CoCrNi medium-entropy alloy via accumulative rolling