Abstract:The influence of the physical mechanisms activated during deformation and annealing on the microstructure and texture evolution as well as on the mechanical properties in the equiatomic CoCrFeMnNi high-entropy alloy (HEA) were investigated. A combination of cold rolling and annealing was used to investigate the HEA in the deformed, recovered, partially recrystallized, and fully recrystallized states. Detailed microstructure and texture analysis was performed by electron backscatter diffraction, transmission electron microscopy, and X-ray diffraction. The mechanical properties were evaluated using uniaxial tensile testing. A specific focus of this investigation was put on studying the influence of deformation and annealing twinning on the material behavior. It was substantiated that during cold rolling deformation, twinning facilitates the transition from the Cu-type to the Brass-type texture, whereas annealing-twinning leads to a strong modification of the texture formed during recrystallization. The formation of specific twin orientations and the randomization of the recrystallization texture were proven by experiments as well as by cellular automaton simulations. During tension of the cold-rolled and annealed material high work-hardenability was observed. We attribute this behavior primarily to the dominance of planar dislocation slip and reduced tendency for dynamic recovery, since deformation twinning was observed to activate only in the non-recrystallized grains and thus, contributed minimally to the overall plasticity. The correlation between deformation/annealing twinning and the microstructure evolution, texture development, and mechanical properties was discussed in detail.

Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Recrystallization and Grain Growth Behavior of Variously Deformed CoCrFeMnNi High-Entropy Alloys: Microstructure Characterization and Modeling

Microstructure and deformation behavior of two TWIP/TRIP high entropy alloys upon grain refinement

Effect of initial grain structure on the concurrent precipitation and recrystallization of Co37Cr20Ni37Ti3Al3 high-entropy alloy

Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys

Deformation mechanism and mechanical properties of a CoCrFeNi high-entropy alloy via room-temperature rolling, cryorolling, and asymmetric cryorolling

Microstructural Evolution and Tensile Properties of Al0.3CoCrFeNi High-Entropy Alloy Associated with B2 Precipitates

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Tensile deformation behavior of twist grain boundaries in CoCrFeMnNi high entropy alloy bicrystals

Effect of Annealing on Microstructure Evolution and Tensile Behavior of Hot-Rolled FeMnCoCrAl High-Entropy Alloy

Microstructure Evolution and Tensile Property of a CuMnFeCoNi High-Entropy Alloy During Thermomechanical Treatment

Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Atomic Insight into Nanoindentation Response of Nanotwinned FeCoCrNiCu High Entropy Alloys

Grain size dependent deformation behavior of a metastable Fe40Co20Cr20Mn10Ni10 high-entropy alloy

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy