Abstract:Flexoelectric material under certain inhomogeneous electric field can be utilized to control the vibration of flexible structure based on the converse flexoelectric effect. The atomic force microscope (AFM) probe placed on the top of flexoelectric patch and the electrode under it with certain voltage applied between them are used to generate the inhomogeneous electric field. The actuation membrane force and bending moment induced by flexoelectric patch in turn influence the vibration of shells. In this study, an elastic cantilever beam excited by an initial static mechanical force locating at the tip end is considered. As the mechanical force withdraws the snapback response appears where the cantilever beam vibrates with all mode participating and their amplitudes decaying exponentially. Multiple actuators, consist of AFM probes and flexoelectric patches, are used here to accelerate the decrease of snapback response. On each probe voltages of multiple frequencies are applied to obtain the control effects on multiple modes. The actuator’s positions minimizing the tip displacement of the beam is selected as the optimal ones. Two way of determining the control voltage, i.e., open loop and close loop, is introduced and the information of positions of the actuators are emphasized in both methods. In case studies, the free damping vibration of the beam without control is evaluated and the first mode dominates the vibration. The open loop method, with constant amplitude of control voltage, doesn’t work well in a relatively long time scale. While the close loop method, with its control voltage related to the tip displacement detected by a sensor, turns out to be more stable and effective. The optimal positions for the actuations of both methods are clustered near the fixed end, where the actuation factor reaches its maximal value. At last, limitation on voltage amplitude is implemented to avoid the stress concentration, under which the control effect does not weaken much. This study serves as an introduction to flexoelectric material & multiple AFM probe based vibration control and a theoretical foundation for further researches.

Improved Reproducibility of Deflection Control Process for Cantilever‐Type MEMS Tactile Sensors

A Stiffness-Tunable MEMS Accelerometer

Static Nano-Control Of Cantilever Beams Using The Inverse Flexoelectric Effect

Support Compliance: A Non-Ignorable Factor for Cantilever Sensors for MEMS Application

Control of Beam’s Snapback Responses Using Multiple Flexoelectric Actuators

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

A Modified Analytical Model to Study the Sensing Performance of a Flexible Capacitive Tactile Sensor Array

Design and Application of a Metal Wet-Etching Post-Process for the Improvement of CMOS-MEMS Capacitive Sensors

A new in situ residual stress measurement method for a MEMS thin fixed-fixed beam structure

Process-Induced Stress and Hydrogen Effects on Monolithic Integrated CMOS-MEMS Micro-Bimaterial Cantilever Sensor Array

Pick-and-place process for sensitivity improvement of the capacitive type CMOS MEMS 2-axis tilt sensor

Transfer of Tactile Sensors Using Stiction Effect Temporary Handling

Surface Stress-Induced Deflection of A Microcantilever with Various Widths and Overall Microcantilever Sensitivity Enhancement Via Geometry Modification

Electrical Adjustment on a MEMS Double-Ended-tuning-fork Resonator

Improved MEMS Piezoelectric Vibratory Stage with Reduced Off-Axis Error

Design, Test and Evaluation of a Novel Die-Attach Structure for Packaging Stress Suppression of MEMS Resonant Accelerometers

Experiments on the Deformation of MEMS Mciro-Cantilever Using AFM

High performance MEMS tactile sensor array with robustness and fabrication simplicity

Post-Cmos Selective Electroplating Technique for the Improvement of Cmos-Mems Accelerometers

Design and Manufacture of a High Precision MEMS Flexible Force Sensor

Design and implementation of an extremely large proof-mass CMOS-MEMS capacitive tilt sensor for sensitivity and resolution improvement