Abstract:The two-step process of electroless plating and electrodeposition was used to successfully prepare a bilayer composite film by electroplating a Ni–Cu–P film with hydrophobic properties on the Ni–P film. The histological features of the two membrane layers were compared. The L360 pipeline steel, Ni–P coating and Ni–Cu–P composite film were evaluated by electrochemical test and erosion corrosion method. Under simulated seawater conditions, the material properties changed before and after different periods of service. The experimental results show that the introduction of Cu can inhibit the growth of cellular structures on the surface of the coating, increase the number of nucleation points, and improve the microstructure of the coating during the deposition of Ni–Cu–P films. The Ni–P/Ni–Cu–P bilayer composite film has a pinecone-like convex structure, which can greatly reduce the surface energy of the film layer and endow the film layer with hydrophobicity. At the same time, it effectively resists the adsorption of water and other external impurities on its surface, and has good anti-fouling performance, thereby slowing down the surface corrosion and improving corrosion resistance. In addition, copper enables the composite coating to have passivation and a uniform and dense coating structure, which is the main reason for the improvement of the corrosion protection performance of the composite coating. The protective effect of the coating can effectively improve the electrochemical resistance and erosion resistance of L360. The Ni–P/Ni–Cu–P bilayer composite film reduces the electrochemical corrosion rate of the substrate from 0.417mmpY to 0.025mmpY, and the scouring weight loss rate of the film decreases to 0.05% of the substrate.

Insights into corrosion resistance enhancement of nickel–phosphorus metallic glass in acid environment by the incorporation of copper

Microstructure and Electrochemistry Behavior of Ni-Cu-P Ternary Nickel-Based Amorphous Coating

Effect of Copper Content on Glass -Forming Ability and Corrosion Resistance of Novel A1NiZrCoYSi High Entropy Amorphous Alloy

Microstructural Characterization and Corrosion Behaviors of Ni-Cu-Co Coatings Electrodeposited in Sulphate-Citrate Bath with Additives

In Situ Thermal Interactions of Cu-Based Anti-Corrosion Coatings on Steel Implemented by Surface Alloying

Effect of cupric sulfate on the microstructure and corrosion behavior of nickel-copper nanostructure coatings synthesized by pulsed electrodeposition technique

Corrosion behavior and strengthening mechanism of Ni-Cu alloy coating on Nd-Fe-B magnets

Microstructures and Corrosion Properties of Nanocrystalline Cu Coatings Synthesized by Electroless Plating

Effects of Cu on the corrosion resistance of heat-treated weathering steel in a marine environment

Effect of Nb Substitution for Cu on Glass Formation and Corrosion Behavior of Zr Cu Ag Al Be Bulk Metallic Glass

Corrosion resistance of electrolessly deposited Ni–P and Ni–W–P alloys with various structures

Microstructure and Corrosion Resistance of Ti-Zr-Cu-Pd-Sn Glassy and Nanocrystalline Alloys

Optimization of the Electroplating Process for Amorphous Nickel- Phosphorus Alloy

Studies of electroless Ni–Co–P ternary alloy on glass fibers

Electrochemical Corrosion Resistance of the Amorphous and Crystalline Pd‐based Alloys in Simulated Seawater

Study on Corrosion Behavior of Ni–P/Ni–Cu–P Superhydrophobic Composite Coatings Preparation on L360 Steel by Two-Step Method

Electrochemical surface nanostructuring of Ti47Cu38Fe2.5Zr7.5Sn2Si1Ag2 metallic glass for improved pitting corrosion resistance

Electrochemical Synthesis and Characterization of Ni–P Alloy Coatings from Eutectic–Based Ionic Liquid

High Corrosion-Resistant Ni–P/Ni/Ni–P Multilayer Coatings on Steel

Effects of Cu Addition on the Glass Forming Ability and Corrosion Resistance of Ti-Zr-Be-Ni Alloys

Preparation of Amorphous Nickel-Phosphorus Alloy Coating by Electroplating