Abstract:Reducing CO2 to value-added multicarbon (C2+) fuels and chemicals using renewable energy is a viable way to circumvent CO2 buildup in the atmosphere and facilitate closing the carbon cycle. To date it remains a challenge to achieve high product selectivity and long-term stability of electrocatalytic carbon dioxide reduction reaction (CO2RR) especially at practically relevant high current levels >100 mA cm–2. Here, we report a simple electrodeposited Cu electrocatalyst on a hydrophobic porous gas-diffusion layer (GDL) electrode affording stable and selective CO2RR to C2+ products in near-neutral KCl electrolytes. By directing the CO2 stream to fully submerged hydrophobic GDLs in a H-cell, high C2+ partial current densities near 100 mA cm–2 were achieved. In a flow-cell setup, the Cu/GDL cathode in 2 M KCl afforded stable CO2RR superior to that in widely used KOH electrolytes. We found that Cu etching/corrosion associated with trace oxygen played a role in the catalyst instability in alkaline media under cathodic CO2RR conditions, a problem largely suppressed in near-neutral electrolyte. A two-electrode CO2 electrolyzer was constructed with a Cu/GDL cathode in KCl catholyte and an anode comprised of nickel–iron hydroxide on nickel foam (NiFe/NF) in a KOH anolyte separated by Nafion membrane. By periodically adding HCl to the KCl catholyte to compensate the increasing pH and remove accumulated (bi)carbonates, we observed little decay over ∼30 h in flow-cell CO2RR activity and selectivity at 150 mA cm–2 with a high Faradaic efficiency (FE) of ∼75% and energy efficiency of 40% for C2+ products.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.0c13427?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.0c13427</a>.Experimental details and supporting data (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c13427/suppl_file/ja0c13427_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Gas diffusion in catalyst layer of flow cell for CO2 electroreduction toward C2+ products

Impact of gas diffusion layer architecture on the performances of Cu-based electrodes for CO 2 electroreduction to ethylene in flow reactors

Porous Bilayer Electrode‐Guided Gas Diffusion for Enhanced CO 2 Electrochemical Reduction

Near-Electrode Concentration Gradients of Bicarbonate and pH within Porous Gas Diffusion Electrode for Optimized Selective CO2 Electroreduction to C2+ Products

Gas diffusion enhanced electrode with ultrathin superhydrophobic macropore structure for acidic CO 2 electroreduction

Introductory Guide to Assembling and Operating Gas Diffusion Electrodes for Electrochemical CO2 Reduction

Self-supported copper-based gas diffusion electrodes improve the local CO2 concentration for efficient electrochemical CO2 reduction

Gas Diffusion Electrodes (GDEs) for Carbon Dioxide (CO 2 ) Reduction in Microfluidic Cells: Towards a Fluid Dynamics Assisted Rational Design

Near-Electrode Concentration Gradients of Bicarbonate and pH within Porous Gas Diffusion Electrode for Optimized Selective CO 2 Electroreduction to C 2+ Products

Converting CO 2 to multi-carbon products at >1 A/cm 2 using gas diffusion electrode based on commercial materials via transfer process engineering

Bridging Activity Gaps Between Batch and Flow Reactor Configurations in the Electroreduction of Carbon Dioxide

Engineering interfacial molecular interactions on Ag Hollow fibre gas diffusion electrodes for high efficiency in CO2 conversion to CO

A continuous flow reactor for tubular gas diffusion electrodes

Additive-Assisted Electrodeposition of Cu on Gas Diffusion Electrodes Enables Selective CO 2 Reduction to Multicarbon Products

Additive-Assisted Electrodeposition of Cu on Gas Diffusion Electrodes Enables Selective CO2 Reduction to Multicarbon Products

Tailoring Interlayer Microenvironment of 2D Layered Double Hydroxides for CO2 Reduction with Enhanced C2+ Production

Hollow fiber gas-diffusion electrodes with tailored crystal facets for tuning syngas production in electrochemical CO 2 reduction

Hydrophobic 1-octadecanethiol functionalized copper catalyst promotes robust high-current CO2 gas-diffusion electrolysis

CuC(O) Interfaces Deliver Remarkable Selectivity and Stability for CO2 Reduction to C2+ Products at Industrial Current Density of 500 mA cm−2

Pore accessibility matters in CO 2 electrolysis: Preventing H 2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes

Selective and High Current CO 2 Electro-Reduction to Multicarbon Products in Near-Neutral KCl Electrolytes