Abstract:Operating Gas Diffusion Electrodes for Electrochemical CO2 Reduction A global transition away from energy dense and cheap fossil fuels will require the commercial implementation of numerous new energy technologies, each of which must be scaled to large enough sizes to impact existing markets and substantially lower global CO2 emissions. The electrochemical conversion of CO2 to chemicals, fuels, and feedstocks has shown enough promise in the past decade to justify both academic and industrial sectors to increase efforts to better assess the potential economic and technical feasibility of the technology. Intensifying the process toward an industrial scale can be achieved by higher production rates, either by simply increasing the total area of catalyst in a reactor or by increasing the reaction rate (current density) for a given area of catalyst. Both approaches will be needed to economically produce an industrial quantity of product in a single plant (e.g., >100 tons product/day). In electrochemical CO2 reduction, however, increasing current densities to those needed for commercial operation (e.g., >200 mA/cm) requires researchers to use cell designs that can supply enough CO2 to the catalyst layer to fuel the reaction, as opposed to traditional H-cell reactors. For these reasons, more and more researchers have begun using catalysts deposited onto gas-diffusion layers (GDLs), where high concentrations of CO2 can be maintained in close proximity to the catalyst layer even at high reaction rates. GDLs can also reduce overall cell potentials by directly improving catalytic activity, while a more system-focused testing platform can help reduce major system losses such as ohmic heating. Researchers operating these experimental devices at higher current densities, however, have discovered a number of operational intricacies that can make the direct switch away from lower current density experiments in an Hcell challenging. This Viewpoint is meant to describe some of

A continuous flow reactor for tubular gas diffusion electrodes

Self-supported copper-based gas diffusion electrodes improve the local CO2 concentration for efficient electrochemical CO2 reduction

Spatio‐Temporal Electrowetting and Reaction Monitoring in Microfluidic Gas Diffusion Electrode Elucidates Mass Transport Limitations

Scale-Up of PTFE-Based Gas Diffusion Electrodes Using an Electrolyte-Integrated Polymer-Coated Current Collector Approach

Tailoring Pore Networks – Gas Diffusion Electrodes via Additive Manufacturing

Gas Diffusion Electrodes (GDEs) for Carbon Dioxide (CO 2 ) Reduction in Microfluidic Cells: Towards a Fluid Dynamics Assisted Rational Design

Introductory Guide to Assembling and Operating Gas Diffusion Electrodes for Electrochemical CO2 Reduction

Impact of gas diffusion layer architecture on the performances of Cu-based electrodes for CO 2 electroreduction to ethylene in flow reactors

Gas diffusion in catalyst layer of flow cell for CO2 electroreduction toward C2+ products

Hierarchically Conductive Electrodes Unlock Stable and Scalable CO2 Electrolysis

Hydrophobized electrospun nanofibers of hierarchical porosity as the integral gas diffusion electrode for full-pH CO2 electroreduction in membrane electrode assemblies

Pore accessibility matters in CO 2 electrolysis: Preventing H 2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes

Antiflooding Gas Diffusion Electrodes Enabled by Liquid-Solid-Liquid Interfaces for Durable CO2 Electrolysis

Accelerated development of gas diffusion electrodes for CO2 electrolyzers

Design and Application of a Gas Diffusion Electrode (GDE) Cell for Operando and In Situ Studies

Scanning Gas Diffusion Electrode Setup for Real-Time Analysis of Catalyst Layers

Gas evolution in electrochemical flow cell reactors induces resistance gradients with consequences for the positioning of the reference electrode

Near-Electrode Concentration Gradients of Bicarbonate and pH within Porous Gas Diffusion Electrode for Optimized Selective CO2 Electroreduction to C2+ Products

Porous Bilayer Electrode‐Guided Gas Diffusion for Enhanced CO 2 Electrochemical Reduction

Accelerated screening of gas diffusion electrodes for carbon dioxide reduction

Crossover of liquid products from electrochemical CO2 reduction through gas diffusion electrode and anion exchange membrane