Abstract:Operating Gas Diffusion Electrodes for Electrochemical CO2 Reduction A global transition away from energy dense and cheap fossil fuels will require the commercial implementation of numerous new energy technologies, each of which must be scaled to large enough sizes to impact existing markets and substantially lower global CO2 emissions. The electrochemical conversion of CO2 to chemicals, fuels, and feedstocks has shown enough promise in the past decade to justify both academic and industrial sectors to increase efforts to better assess the potential economic and technical feasibility of the technology. Intensifying the process toward an industrial scale can be achieved by higher production rates, either by simply increasing the total area of catalyst in a reactor or by increasing the reaction rate (current density) for a given area of catalyst. Both approaches will be needed to economically produce an industrial quantity of product in a single plant (e.g., >100 tons product/day). In electrochemical CO2 reduction, however, increasing current densities to those needed for commercial operation (e.g., >200 mA/cm) requires researchers to use cell designs that can supply enough CO2 to the catalyst layer to fuel the reaction, as opposed to traditional H-cell reactors. For these reasons, more and more researchers have begun using catalysts deposited onto gas-diffusion layers (GDLs), where high concentrations of CO2 can be maintained in close proximity to the catalyst layer even at high reaction rates. GDLs can also reduce overall cell potentials by directly improving catalytic activity, while a more system-focused testing platform can help reduce major system losses such as ohmic heating. Researchers operating these experimental devices at higher current densities, however, have discovered a number of operational intricacies that can make the direct switch away from lower current density experiments in an Hcell challenging. This Viewpoint is meant to describe some of

Scale-Up of PTFE-Based Gas Diffusion Electrodes Using an Electrolyte-Integrated Polymer-Coated Current Collector Approach

Hierarchically Conductive Electrodes Unlock Stable and Scalable CO2 Electrolysis

A continuous flow reactor for tubular gas diffusion electrodes

Electrocatalytic Functionalized Specialty Paper as Low Cost Porous Transport Layer Material in CO2‐Electrolysis

Antiflooding Gas Diffusion Electrodes Enabled by Liquid-Solid-Liquid Interfaces for Durable CO2 Electrolysis

Hydrophobized electrospun nanofibers of hierarchical porosity as the integral gas diffusion electrode for full-pH CO2 electroreduction in membrane electrode assemblies

Gas Diffusion Electrodes (GDEs) for Carbon Dioxide (CO 2 ) Reduction in Microfluidic Cells: Towards a Fluid Dynamics Assisted Rational Design

Converting CO2 to Multi-Carbon Products at >1 A/cm2 Using Gas Diffusion Electrode Based on Commercial Materials Via Transfer Process Engineering

Converting CO 2 to multi-carbon products at >1 A/cm 2 using gas diffusion electrode based on commercial materials via transfer process engineering

Pore Engineering in Gas Diffusion Layer of Phthalocyanine Cobalt Cathode to Promote Electrochemical CO2-to-CO Reduction

Pore accessibility matters in CO 2 electrolysis: Preventing H 2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes

Scalable Gas Diffusion Electrode Fabrication for Electrochemical CO2 Reduction Using Physical Vapor Deposition Methods.

Insights into Hydrophobicity‐tuned Catalyst Microenvironment in Gas Diffusion Electrode for Boosting CO2 Electrolysis

Introductory Guide to Assembling and Operating Gas Diffusion Electrodes for Electrochemical CO2 Reduction

Accelerated development of gas diffusion electrodes for CO2 electrolyzers

The Gas Diffusion Electrode Setup as Straightforward Testing Device for Proton Exchange Membrane Water Electrolyzer Catalysts

Intrinsically Conductive and Cu-Functionalized Polymer-Composite Membranes as Gas Diffusion Electrodes for CO2 Electroreduction

Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells

Tailoring Pore Networks – Gas Diffusion Electrodes via Additive Manufacturing

Novel thin/tunable gas diffusion electrodes with ultra-low catalyst loading for hydrogen evolution reactions in proton exchange membrane electrolyzer cells

Surface coating combined with in situ cyclic voltammetry to enhance the stability of gas diffusion electrodes for electrochemical CO2 reduction