Abstract:Operating Gas Diffusion Electrodes for Electrochemical CO2 Reduction A global transition away from energy dense and cheap fossil fuels will require the commercial implementation of numerous new energy technologies, each of which must be scaled to large enough sizes to impact existing markets and substantially lower global CO2 emissions. The electrochemical conversion of CO2 to chemicals, fuels, and feedstocks has shown enough promise in the past decade to justify both academic and industrial sectors to increase efforts to better assess the potential economic and technical feasibility of the technology. Intensifying the process toward an industrial scale can be achieved by higher production rates, either by simply increasing the total area of catalyst in a reactor or by increasing the reaction rate (current density) for a given area of catalyst. Both approaches will be needed to economically produce an industrial quantity of product in a single plant (e.g., >100 tons product/day). In electrochemical CO2 reduction, however, increasing current densities to those needed for commercial operation (e.g., >200 mA/cm) requires researchers to use cell designs that can supply enough CO2 to the catalyst layer to fuel the reaction, as opposed to traditional H-cell reactors. For these reasons, more and more researchers have begun using catalysts deposited onto gas-diffusion layers (GDLs), where high concentrations of CO2 can be maintained in close proximity to the catalyst layer even at high reaction rates. GDLs can also reduce overall cell potentials by directly improving catalytic activity, while a more system-focused testing platform can help reduce major system losses such as ohmic heating. Researchers operating these experimental devices at higher current densities, however, have discovered a number of operational intricacies that can make the direct switch away from lower current density experiments in an Hcell challenging. This Viewpoint is meant to describe some of

Introductory Guide to Assembling and Operating Gas Diffusion Electrodes for Electrochemical CO2 Reduction

Gas Diffusion Electrodes (GDEs) for Carbon Dioxide (CO 2 ) Reduction in Microfluidic Cells: Towards a Fluid Dynamics Assisted Rational Design

Gas diffusion electrodes, reactor designs and key metrics of low-temperature CO2 electrolysers

Gas diffusion in catalyst layer of flow cell for CO2 electroreduction toward C2+ products

A continuous flow reactor for tubular gas diffusion electrodes

Fundamentals of Gas Diffusion Electrodes and Electrolysers for Carbon Dioxide Utilisation: Challenges and Opportunities

Impact of gas diffusion layer architecture on the performances of Cu-based electrodes for CO 2 electroreduction to ethylene in flow reactors

Converting CO 2 to multi-carbon products at >1 A/cm 2 using gas diffusion electrode based on commercial materials via transfer process engineering

Self-supported copper-based gas diffusion electrodes improve the local CO2 concentration for efficient electrochemical CO2 reduction

Porous Bilayer Electrode‐Guided Gas Diffusion for Enhanced CO 2 Electrochemical Reduction

Scalable Gas Diffusion Electrode Fabrication for Electrochemical CO2 Reduction Using Physical Vapor Deposition Methods.

Gas diffusion electrodes (GDEs) for electrochemical reduction of carbon dioxide, carbon monoxide, and dinitrogen to value-added products: a review

Best Practices and Common Pitfalls in Experimental Investigation of Electrochemical CO 2 Reduction at Gas Diffusion Electrodes

Hierarchically Conductive Electrodes Unlock Stable and Scalable CO2 Electrolysis

Accelerated screening of gas diffusion electrodes for carbon dioxide reduction

Exploring the (Dis)‐Similarities of Half‐Cell and Full Cell Zero‐Gap Electrolyzers for the CO2 Electroreduction

Introduction of a Conductive Layer into Flood-Resistant Gas Diffusion Electrodes with Polymer Substrate for an Efficient Electrochemical CO 2 Reduction with Copper Oxide

Electroreduction of CO2 toward High Current Density

Modeling and Upscaling Analysis of Gas Diffusion Electrode-Based Electrochemical Carbon Dioxide Reduction Systems

Additive-Assisted Electrodeposition of Cu on Gas Diffusion Electrodes Enables Selective CO 2 Reduction to Multicarbon Products

Additive-Assisted Electrodeposition of Cu on Gas Diffusion Electrodes Enables Selective CO2 Reduction to Multicarbon Products