Abstract:High-throughput techniques are being actively studied to expedite the evaluation of the electrocatalytic activity of newly developed materials. These techniques include the use of optical sensing or electrochemical array cells in stagnant or hydrodynamic aqueous electrolytes [1-2]. A new high-throughput electrochemical cell has been developed utilizing multiple glassy carbon working electrodes with dimensions comparable to those of a conventional ring-disk electrode (RDE) that are inserted into a channel flow cell (Figure 1) comprised of two PEEK blocks separated by a gasket that defines the electrolyte channel depth. This cell enables evaluation of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) activity as a function of the potential of multiple catalyst samples simultaneously that are deposited on the glassy carbon electrodes using standard methods used for RDE electrodes (e.g., using a hand-held micropipette). As shown in Figure 1, a common reference electrode is located in the lower cell block across an electrolyte channel from the working electrodes and a common counter electrode is located in the electrolyte outlet. Electrolyte flow has been simulated to ensure that the electrolyte is evenly distributed throughout the shallow flow channel with uniform laminar electrolyte flow and identical flow rate for all working electrodes. The new cell is coupled with a Bio-logic multichannel Potentiostat (VSP) that allows the use of multiple working electrodes simultaneously with a common counter electrode and common reference electrode. The catalyst activity and stability results obtained with the new cell have been verified by comparison with RDE measurements for the same catalysts. Acknowledgments This work was supported by the U.S. Department of Energy, Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office under the auspices of the Electrocatalysis Consortium (ElectroCat). Argonne National Laboratory is managed for the U.S Department of Energy by the University of Chicago Argonne, LLC, also under contract DE-AC-02-06CH11357. References [1] Gregoire, J.M., et al., Scanning droplet cell for high throughput electrochemical and photoelectrochemical measurements. Review of Scientific Instruments, 2013. 84(2). [2] Reddington, E., et al., Combinatorial electrochemistry: A highly parallel, optical screening method for discovery of better electrocatalysts. Science, 1998. 280(5370): p. 1735-1737. Figure 1

Scanning Gas Diffusion Electrode Setup for Real-Time Analysis of Catalyst Layers

Design and Application of a Gas Diffusion Electrode (GDE) Cell for Operando and In Situ Studies

Accelerated screening of gas diffusion electrodes for carbon dioxide reduction

The Gas Diffusion Electrode Setup as Straightforward Testing Device for Proton Exchange Membrane Water Electrolyzer Catalysts

Testing fuel cell catalysts under more realistic reaction conditions: accelerated stress tests in a gas diffusion electrode setup

Characterization of Oxygen and Ion Mass Transport Resistance in Fuel Cell Catalyst Layers in Gas Diffusion Electrode Setups

Optimizing the use of a gas diffusion electrode setup for CO 2 electrolysis imitating a zero-gap MEA design

Carbon-supported Platinum Electrocatalysts probed in a Gas Diffusion Setup with Alkaline Environment: how Particle Size and Mesoscopic Environment influence the Degradation Mechanism

An optimised cell for in situ XAS of gas diffusion electrocatalyst electrodes

Spatio‐Temporal Electrowetting and Reaction Monitoring in Microfluidic Gas Diffusion Electrode Elucidates Mass Transport Limitations

High-Throughput Activity Screening of Oxygen Reduction and Oxygen Evolution Catalysts

A thermostatic cell with gas diffusion electrode for oxygen reduction reaction under fuel cell relevant conditions

Real Time Analysis of the CO2 Reduction Reaction Products in a Cu-Gde Setup

Probing the Catalytically Active Region in a Nanoporous Gold Gas Diffusion Electrode for Highly Selective Carbon Dioxide Reduction

Novel thin/tunable gas diffusion electrodes with ultra-low catalyst loading for hydrogen evolution reactions in proton exchange membrane electrolyzer cells

A continuous flow reactor for tubular gas diffusion electrodes

Application of gas diffusion electrodes in bioelectrochemical syntheses and energy conversion

Exploring the (Dis)‐Similarities of Half‐Cell and Full Cell Zero‐Gap Electrolyzers for the CO2 Electroreduction

ICP–MS Assisted EDX Tomography: A Robust Method for Studying Electrolyte Penetration Phenomena in Gas Diffusion Electrodes Applied to CO2 Electrolysis

Use of Electrochemical Impedance Spectroscopy for the Evaluation of Performance of PEM Fuel Cells Based on Carbon Cloth Gas Diffusion Electrodes

Platinum Dissolution in Realistic Fuel Cell Catalyst Layers