Abstract:The successful electrochemical reduction of CO 2 (eCO 2 R) into valuable fuels and chemicals relies on the development of low-cost, effective carbon-bonded metal catalysts. Carbon-bonded metal catalysts are crucial for efficient eCO 2 R due to their dual functionality—high electrical conductivity from carbon and catalytic activity from the metal. In this study, a facile hydrothermal method was used to synthesize carbon-derived bismuth oxide nanospheres (C-BiO x ) on porous nickel foam (NF) electrodes as electrocatalysts for eCO 2 R. The eCO 2 R activity of this catalyst was evaluated in H-type cells and compared with commercially available Pd/C and Ag-nanoparticle catalysts. Our finding revealed that C-BiO x /NF exhibited a higher eCO 2 R activity (corresponding to the CO Faradaic efficiency (FE) of 16.2 % at −1 V vs. reversible hydrogen electrode (RHE) and HCOOH FE of 85.4 % at −0.7 V vs. RHE) than those of the Ag nanoparticle-based and Pd/C catalysts. Mechanistic insights from DFT-based studies further supported the enhanced catalytic activity of C-BiOx for HCOOH production over Ag catalysts. The fabricated catalyst was further utilized in a zero-gap CO 2 electrolyzer for gas-phase CO 2 reduction containing a self-supporting C-BiO x /NF gas diffusion layer (GDL). An anion exchange membrane-based CO 2 electrolyzer demonstrated a higher FE for CO formation (47.1%) with an energy efficiency (EE) of 29.5% as compared to those of a polymer electrolyte membrane-based CO 2 electrolyzer (FE: 25.2%, EE: 18.4%). Notably, the C-BiO x /NF catalyst exhibited remarkable stability (8 h) in the gas-phase GDL compared to that observed during the liquid-phase eCO 2 R. Our work provides new insights into utilizing improved catalyst designs in conjunction with flow cells for successful commercial implementation of this promising technology.

Electrocatalytic Functionalized Specialty Paper as Low Cost Porous Transport Layer Material in CO2‐Electrolysis

Pore Engineering in Gas Diffusion Layer of Phthalocyanine Cobalt Cathode to Promote Electrochemical CO2-to-CO Reduction

Scale-Up of PTFE-Based Gas Diffusion Electrodes Using an Electrolyte-Integrated Polymer-Coated Current Collector Approach

Porous Bilayer Electrode‐Guided Gas Diffusion for Enhanced CO2 Electrochemical Reduction

Hydrophobized electrospun nanofibers of hierarchical porosity as the integral gas diffusion electrode for full-pH CO2 electroreduction in membrane electrode assemblies

Polymer‐Supported Liquid Layer Electrolyzer Enabled Electrochemical CO2 Reduction to CO with High Energy Efficiency

Pore accessibility matters in CO 2 electrolysis: Preventing H 2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes

Antiflooding Gas Diffusion Electrodes Enabled by Liquid-Solid-Liquid Interfaces for Durable CO2 Electrolysis

Hierarchically Conductive Electrodes Unlock Stable and Scalable CO2 Electrolysis

Precise Site-Hydrophobicity Modulation for Boosting High-Performance CO2 Electroreduction

Precise Site-Hydrophobicity Modulation for Boosting High-Performance CO 2 Electroreduction

Boosting the Faradaic Efficiency for Carbon Dioxide to Monoxide on a Phthalocyanine Cobalt Based Gas Diffusion Electrode to Higher Than 99% Via Microstructure Regulation of Catalyst Layer

Trilayer Polymer Electrolytes Enable Carbon‐efficient CO2 to Multicarbon Product Conversion in Alkaline Electrolyzers

Converting CO 2 to multi-carbon products at >1 A/cm 2 using gas diffusion electrode based on commercial materials via transfer process engineering

Thin film Ag electrodes fabrication for sustainable and high-efficiency electroreduction of CO2 to CO

Converting CO2 to Multi-Carbon Products at >1 A/cm2 Using Gas Diffusion Electrode Based on Commercial Materials Via Transfer Process Engineering

Near-Electrode Concentration Gradients of Bicarbonate and pH within Porous Gas Diffusion Electrode for Optimized Selective CO2 Electroreduction to C2+ Products

Molecularly Dispersed Cobalt Phthalocyanine Mediates Selective and Durable CO2 Reduction in a Membrane Flow Cell

Intrinsically Conductive and Cu-Functionalized Polymer-Composite Membranes as Gas Diffusion Electrodes for CO2 Electroreduction

Gas-phase CO 2 electrolysis using carbon-derived bismuth nanospheres on porous nickel foam gas diffusion electrode

Insights into Hydrophobicity‐tuned Catalyst Microenvironment in Gas Diffusion Electrode for Boosting CO2 Electrolysis