Abstract:Carbon dioxide (CO 2 ) electroreduction reaction (CO 2 RR) offers a promising strategy for the conversion of CO 2 into valuable chemicals and fuels. CO 2 RR in acidic electrolytes would have various advantages due to the suppression of carbonate formation. However, its reaction rate is severely limited by the slow CO 2 diffusion due to the absence of hydroxide that facilitates the CO 2 diffusion in an acidic environment. Here, we design an optimal architecture of a gas diffusion electrode (GDE) employing a copper-based ultrathin superhydrophobic macroporous layer, in which the CO 2 diffusion is highly enhanced. This GDE retains its applicability even under mechanical deformation conditions. The CO 2 RR in acidic electrolytes exhibits a Faradaic efficiency of 87% with a partial current density of −1.6 A cm −2 for multicarbon products (C 2+ ), and of −0.34 A cm −2 when applying dilute 25% CO 2 . In a highly acidic environment, C 2+ formation occurs via a second order reaction which is controlled by both the catalyst and its hydroxide.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the efficiency and selectivity of the carbon dioxide (CO₂) electro - reduction reaction (CO₂RR) in acidic electrolytes. Specifically, the researchers designed a gas diffusion electrode (GDE) with an ultrathin, super - hydrophobic macroporous structure to enhance the diffusion rate of CO₂ at the catalyst - electrolyte interface, thereby overcoming the problem of slow CO₂ diffusion in an acidic environment. This improvement is crucial for achieving the generation of efficient multi - carbon products (C₂⁺). ### Main Problems and Solutions 1. **CO₂ Diffusion Limitation**: - **Problem**: In an acidic environment, due to the lack of hydroxide ions (OH⁻), the adsorption and diffusion of CO₂ molecules are limited, resulting in a low CO₂RR reaction rate. - **Solution**: By designing a copper - based GDE with an ultrathin, super - hydrophobic macroporous structure, the diffusion rate of CO₂ is significantly increased. This structure not only reduces the diffusion distance but also increases the pore size and reduces the collision frequency between CO₂ molecules and the pore walls, thereby increasing the CO₂ concentration. 2. **Mechanical Stability**: - **Problem**: Traditional GDEs are usually made of brittle and inflexible carbon materials and are easily damaged. - **Solution**: The designed Cu - GDE has good mechanical flexibility and durability and can maintain its performance even under severe bending and twisting conditions. 3. **Selectivity at High Current Densities**: - **Problem**: At high current densities, the competitiveness of the hydrogen evolution reaction (HER) increases, reducing the selectivity of C₂⁺. - **Solution**: By optimizing the content of OH species on the catalyst surface, the local H⁺ concentration is reduced, thereby effectively suppressing HER and increasing the selectivity of C₂⁺. ### Experimental Results - **Faraday Efficiency (FE)**: In acidic electrolytes with pH 6 and pH 1, Cu - GDE achieved a C₂⁺ Faraday efficiency of 87%. - **Partial Current Density (jC₂⁺)**: At pH 6, jC₂⁺ reached −1.6 A cm⁻²; at pH 1, when using diluted 25% CO₂, jC₂⁺ reached −0.34 A cm⁻². - **Single - Pass Conversion Efficiency (SPCE)**: Through the secondary CO conversion mechanism, at a low CO₂ flow rate, SPCE reached 42%. ### Kinetic Analysis - **Reaction Order**: At pH 6, CO₂RR exhibits a first - order reaction; at pH 1, CO₂RR exhibits a second - order reaction, which is jointly controlled by the catalyst and OH species. - **Role of OH Species**: The presence of OH species can reduce the local H⁺ concentration, thereby suppressing HER and increasing the selectivity of C₂⁺. ### Conclusion By designing and optimizing Cu - GDE with an ultrathin, super - hydrophobic macroporous structure, the researchers successfully solved the problem of CO₂RR diffusion limitation in an acidic environment and significantly improved the reaction efficiency and selectivity. This achievement provides important theoretical and technical support for the industrial application of CO₂ electro - reduction technology.

Gas diffusion enhanced electrode with ultrathin superhydrophobic macropore structure for acidic CO 2 electroreduction

Hydrophobized electrospun nanofibers of hierarchical porosity as the integral gas diffusion electrode for full-pH CO2 electroreduction in membrane electrode assemblies

Porous Bilayer Electrode‐Guided Gas Diffusion for Enhanced CO 2 Electrochemical Reduction

Near-Electrode Concentration Gradients of Bicarbonate and pH within Porous Gas Diffusion Electrode for Optimized Selective CO2 Electroreduction to C2+ Products

Superaerophilic Copper Nanowires for Efficient and Switchable CO2 Electroreduction.

Hydrophobic 1-octadecanethiol functionalized copper catalyst promotes robust high-current CO2 gas-diffusion electrolysis

Self-supported copper-based gas diffusion electrodes improve the local CO2 concentration for efficient electrochemical CO2 reduction

Copper hollow fiber electrode for efficient CO2 electroreduction

Antiflooding Gas Diffusion Electrodes Enabled by Liquid-Solid-Liquid Interfaces for Durable CO2 Electrolysis

Converting CO 2 to multi-carbon products at >1 A/cm 2 using gas diffusion electrode based on commercial materials via transfer process engineering

Precise Site-Hydrophobicity Modulation for Boosting High-Performance CO 2 Electroreduction

Gas diffusion in catalyst layer of flow cell for CO2 electroreduction toward C2+ products

Introduction of a Conductive Layer into Flood-Resistant Gas Diffusion Electrodes with Polymer Substrate for an Efficient Electrochemical CO 2 Reduction with Copper Oxide

Hydrophobicity Graded Gas Diffusion Layer for Stable Electrochemical Reduction of CO2

Intrinsically Conductive and Cu-Functionalized Polymer-Composite Membranes as Gas Diffusion Electrodes for CO2 Electroreduction

Pore accessibility matters in CO 2 electrolysis: Preventing H 2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes

Hierarchically Conductive Electrodes Unlock Stable and Scalable CO2 Electrolysis

Surface coating combined with in situ cyclic voltammetry to enhance the stability of gas diffusion electrodes for electrochemical CO2 reduction

Micro/Nano‐Structured Superhydrophobic Gas Diffusion Electrode for Boosting the Stability of Industrial‐Compatible Electrochemical CO Production in Flow Cells

Engineering interfacial molecular interactions on Ag Hollow fibre gas diffusion electrodes for high efficiency in CO2 conversion to CO

Near-Electrode Concentration Gradients of Bicarbonate and pH within Porous Gas Diffusion Electrode for Optimized Selective CO 2 Electroreduction to C 2+ Products