Abstract:Polycrystalline ZnS is a typical infrared optical material. It is widely used in advanced optical systems due to its excellent optical properties. The machining accuracy of polycrystalline ZnS optical elements must satisfy the requirements of high-performance system development. However, the soft and brittle nature of the material poses a challenge for high-quality and efficient machining. In recent years, in situ laser-assisted diamond cutting has been proven to be an effective method for ultra-precision cutting of brittle materials. In this study, the mechanism of in situ laser-assisted cutting on ultra-precision cutting machinability enhancement of ZnS was investigated. Firstly, the physical properties of ZnS were characterized by high-temperature nanoindentation experiments. The result revealed an increase in ductile machinability of ZnS due to plastic deformation and a decrease in microhardness and Young's modulus at high temperatures. It provided a fundamental theory for the ductile–brittle transition of ZnS. Subsequently, a series of diamond-cutting experiments were carried out to study the removal mechanism of ZnS during in situ laser-assisted cutting. It was found that the mass damage initiation depth groove generated by in situ laser-assisted cutting increased by 57.99% compared to the groove generated by ordinary cutting. It was found that micron-sized pits were suppressed under in situ laser-assisted cutting. The main damage form of HIP-ZnS was changed from flake spalling and pits to radial cleavage cracks. Additionally, the laser can suppress the removal mode difference of different grain crystallographic and ensure the ductile region processing. Finally, planning cutting experiments were carried out to verify that a smooth and uniform surface with Sa of 3.607 nm was achieved at a laser power of 20 W, which was 73.58% better than normal cutting. The main components of roughness were grain boundary steps and submicron pit. This study provides a promising method for ultra-precision cutting of ZnS.

Effect of wet chemical etching on femtosecond laser fabricated surface microstructure of polycrystalline ZnS

Effect of Solution Concentrations on Crystal Structure, Surface Topographies and Photoluminescence Properties of ZnO Thin Films

Effect of solution concentration on surface morphology, optical properties and solar light response of ZnO thin films

Towards obtaining high-quality surfaces with nanometric finish by femtosecond laser ablation: A case study on coppers

A Chemical Strategy to Reinforce Electrically Pumped Ultraviolet Random Lasing from ZnO Films

Controlling the Facet of ZnO During Wet Chemical Etching Its (0001¯) O‐Terminated Surface

Stress-Etching Using Laser Electrochemical Micromachining with Masks

In Situ Study Wet Chemical Etching of ZnO Nanowires with Different Diameter and Polar Surfaces by LCTEM

Femtosecond laser ablation of Zn in air and ethanol: effect of fluence on the surface morphology, ablated area, ablation rate and hardness

In Situ Study of Wet Chemical Etching of ZnO Nanowires with Different Diameters and Polar Surfaces by LCTEM

Unraveling Anisotropic and Pulsating Etching of ZnO Nanorods in Hydrochloric Acid via Correlative Electron Microscopy

One-step fabrication of fine surfaces via femtosecond laser on sliced SiC

Surface Energy Guided Sub-10 Nm Hierarchy Structures Fabrication by Direct E-Beam Etching

Investigation on the Machinability of Polycrystalline ZnS by Micro-Laser-Assisted Diamond Cutting

Time-dependent Wettability of Nano-Patterned Surfaces Fabricated by Femtosecond Laser with High Efficiency

Micro nano antireflective and hydrophobic hierarchical structures ZnS by femtosecond laser

Rapid fabrication of antireflective structures on ZnS surface by spatial shaping femtosecond laser

Surface Structure Dependence of Mechanochemical Etching: Scanning Probe-Based Nanolithography Study on Si(100), Si(110), and Si(111)

Comparative Surfacing Studies of Sputtered and Thermal Annealed ZnO Films Wet Etched with NH 4 Cl and Acidic Etchants

Effects of Chemical Etching on Surface Structure and Tribological Behavior of Silicate Substrates

Wet Chemical Etching of Lead Zirconate Titanate Thin Film for Microelectromechanical Systems Applications