Abstract:Understanding the development and performance of UV photodetectors is crucial, given their extensive applications in both military and civilian sectors. The evolution of self-powered photodetectors, especially those based on heterojunction nanostructures, has demonstrated significant potential for enhancing both device efficiency and functionality. By exploring the effects of material composition and structural design, can optimize these devices for improved photoelectric response and energy efficiency. In this study, we prepared the CuO/ZnO NRs heterojunction photodetector on an ITO substrate to enhance photoelectric response of UV detectors. The fabrication process utilized the hydrothermal method and the spin coating technique. The effect of CuO concentration on the optical response of the photodetector under UV radiation at wavelengths of 405 nm and 385 nm was investigated. The samples were characterized using FESSEM, XRD, EDX, and UV-Vis spectra. The device is further distinguished by its standard I-V curves and photocurrent-time curves, which demonstrate the device's behavior under various light conditions. The prepared thin films are polycrystalline, with CuO layers displaying monoclinic phases and ZnO layers exhibiting a hexagonal wurtzite phase. All samples have the potential to exhibit photovoltaic properties and self-powered capabilities. Furthermore, the I-V curve confirms that the photocurrent mechanism of these junctions adheres to the recombination standard, in addition to demonstrating correction behavior. A sample with a CuO concentration of 0.1 M shows the highest photosensitivity, reaching 340,700%, and a photocurrent gain (Iph/Idark) of 3,408 when exposed to light irradiation at 405 nm. Additionally, it exhibits a rapid response time of 0.8 s.

Enhanced UV detection performance of a CdZnTe-based photodetector through surface polishing treatments

Performance optimization of CZT thick films by CdTe buffer layers for solar-blind ultraviolet photoelectric detectors

Enhancing Ultraviolet Photoresponse of Zno Nanowire Device by Surface Functionalization

The Influence of Surface Treatment on the Performance of Photoconductive Detectors Based on Silicon Wafer

Performance Improvement of ZnO Nanowire Based Surface Acoustic Wave Ultraviolet Detector Via Poly(3,4-Ethylenedioxythiophene) Surface Coating

Comparative Study of Encapsulated Solution-Processed Zinc Oxide Ultraviolet Photodetectors with Different Contacts

Interface Engineering on ZnO/Au Based Schottky Junction for Enhanced Photoresponse of UV Detector with TiO2 Inserting Layer

Effects of UV-ozone treatment on the performance of deep-ultraviolet photodetectors based on ZnGa2O4 epilayers

Regulation of Te oxide layer on a CdZnTe film for adjusting surface contact of a CdZnTe-based device

Progress in the Development of CdZnTe Unipolar Detectors for Different Anode Geometries and Data Corrections

Investigating the influence of CdZnTe and HgCdTe material quality on detector image performance

Colloidal Chemically Fabricated Zno : Cu-Based Photodetector with Extended Uv-Visible Detection Waveband

Mechanical polishing with chemical passivation of perovskite single crystal for high-performance X-ray detector

Performance improvement of UV photodetectors using Cd-doped ZnO nanostructures

Concurrent Improvement of Photocarrier Separation and Extraction in ZnO Nanocrystal Ultraviolet Photodetectors

Tunable photoresponse properties of CuI/Si self-powered photodetectors through Zn doping engineering

Enhancing Photoelectric Response of Self-powered UV and Visible Detectors Using CuO/ZnO NRs Heterojunctions

Photocarrier Transport Reconstruction and Dramatical Performance Enhancement in Ultrawide-Bandgap Ε-Ga2o3 Photodetectors Via Surface Defect Passivation

Interface optimization of free-standing CdZnTe films for solar-blind ultraviolet detection: Substrate dependence

Detection of CdZnTe Detectors to Low Energy Photos

Passivation of surface states in the ZnO nanowire with thermally evaporated copper phthalocyanine for hybrid photodetectors