Abstract:The optimization of back contact interface is crucial to improve the performance of Cu2ZnSnS4 (CZTS) thin film solar cells. In this paper, we first employ Al-doped ZnO (AZO) as the intermediate layer into the Mo/CZTS interface to improve the quality of back contact region. This AZO intermediate layer, obtained from the sputtering method prior to the CZTS precursor deposition, initially blocks the direct contact of CZTS with the Mo layer and thus indeed suppresses the decomposition reaction between Mo and CZTS. Consequently, the generation of voids at the back contact region is obviously avoided. Besides, the AZO intermediate layer can inhibit the reaction between sulfur (S) and Mo during sulfurization process, and thus significantly reduce the thickness of MoS2. Meanwhile, the AZO intermediate layer with suitable thickness does not affect the crystal quality of CZTS absorber layer. Moreover, the effects of different thicknesses of predeposited AZO on the film morphology, composition, and corresponding device performance were systematically studied. After optimizing the thickness of the AZO layer, the efficiency of the resultant device has increased from 7.1% to 8.4% (the active area efficiency is 9.2%).The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18799?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18799</a>.XRR patterns of 15, 30, 45, and 60 nm AZO films deposited on SLG; relevant formula and description of how to calculate the film thickness from XRR mode of XRD; EDS mapping for surface of four CZTS films with 0 nm AZO, 10 nm AZO, 20 nm AZO, and 30 nm AZO and EDS mapping for cross-sectional of CZTS films with 30 nm AZO; statistical box charts of typical parameters of CZTS devices with different thicknesses of AZO at back contact region; cross-sectional SEM images of four CZTS devices with different thicknesses of AZO at back contact region; and comparison of different intermediate layers for CZTS cells (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18799/suppl_file/am0c18799_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Regulation of Te oxide layer on a CdZnTe film for adjusting surface contact of a CdZnTe-based device

Improvement of Transparent Conductive Properties of GZO/Cu/GZO Tri-Layer Films by Introducing H2 into Sputtering Atmosphere

The role of O2 in CdSeTe thin film deposition and CdSeTe/CdTe solar cell performance

The surface leakage currents of CdZnTe wafers

Solution-based Surface Modification Method for High-Performance ZnO Transistors

Electrochemically Stable Ligands of ZnO Electron-Transporting Layers for Quantum-Dot Light-Emitting Diodes.

Controlled Layer-by-Layer Oxidation of MoTe2 via O3 Exposure

Modification of Back Contact in Cu 2 ZnSnS 4 Solar Cell by Inserting Al-Doped ZnO Intermediate Layer

Surface Modification on Solution Processable ZrO2 High-k Dielectrics for Low Voltage Operations of Organic Thin Film Transistors

Precise Layer Control of MoTe2 by Ozone Treatment.

Boosting Kesterite Solar Cell Performance with Tantalum Oxide Passivation Layer and In Situ Formed Point Contacts

Atomic Layer Deposition of Al-Doped ZnO Contacts for ZnO Thin-Film Transistors

Enhanced Performance of ZnO Thin-Film Transistors with ZnO Dual-Active-layer

Amorphous NdIZO Thin Film Transistors with Contact-Resistance-Adjustable Cu S/D Electrodes

Performance optimization of CZT thick films by CdTe buffer layers for solar-blind ultraviolet photoelectric detectors

Regulating Ag Wettability via Modulating Surface Stoichiometry of ZnO Substrates for Flexible Electronics

Chemical and Electrical Instability of MgxZn1−xO in CdTe Thin Film Solar Cell

Improving TFT Device Performance by Changing the Thickness of the LZTO/ZTO Dual Active Layer

Effect of Surface Treatment on Photo-Electric Properties of CZT Thick Film for Radiation Detector

The Effect of Al2O3 Surface Passivation Layer Prepared by ALD Method on the Performance of CdZnTe Thick Film Detectors

Back Contact Engineering to Improve CZTSSe Solar Cell Performance by Inserting MoO3 Sacrificial Nanolayers