Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Surface Modification on Solution Processable ZrO2 High-k Dielectrics for Low Voltage Operations of Organic Thin Film Transistors

Fully solution-induced high performance indium oxide thin film transistors with ZrOx high-k gate dielectrics

Microstructure, optical and electrical properties of solution-derived peroxo-zirconium oxide gate dielectrics for CMOS application

Solution Processable High Quality ZrO2 Dielectric Films for Low Operation Voltage and Flexible Organic Thin Film Transistor Applications

Room Temperature Fabrication of High Quality ZrO2Dielectric Films for High Performance Flexible Organic Transistor Applications

Enhancement of electrical properties of solution-processed oxide thin film transistors using ZrO<sub>2</sub> gate dielectrics deposited by an oxygen-doped solution

Efficient gradient heating-up approach for rapid growth of high-quality amorphous ZrO2 dielectric films

Advancements in Metal Oxide Thin Film Quality in Solution-Processed High-κ Dielectrics for High-Performance Transistors

Solution processed zirconium oxide dielectric thin films for electronic applications

Low-Temperature Solution-Processed Gate Dielectrics for High-Performance Organic Thin Film Transistors

High Mobility Thin-Film Transistor with Solution-Processed Hafnium-Oxide Dielectric and Zinc-Indium-Tin-Oxide Semiconductor

Facile Synthesis of Solution-Processed Silica and Polyvinyl Phenol Hybrid Dielectric for Flexible Organic Transistors

Editorial: High-Performance Organic Thin-Film Transistors

Structure and Dielectric Property of High-k ZrO2 Films Grown by Atomic Layer Deposition Using Tetrakis(Dimethylamido)Zirconium and Ozone

Oxygen incorporated solution-processed high-kappa La2O3 dielectrics with large-area uniformity, low leakage and high breakdown field comparable with ALD deposited films

Nanocluster-Based Ultralow-Temperature Driven Oxide Gate Dielectrics for High-Performance Organic Electronic Devices

Solution Processed Metal Oxide High-κ Dielectrics for Emerging Transistors and Circuits

Spontaneous Generation of a Molecular Thin Hydrophobic Skin Layer on a Sub-20 nm, High- k Polymer Dielectric for Extremely Stable Organic Thin-Film Transistor Operation

Anodization-Induced ZrOx/AlOx Stacked Films for Low-Temperature, Solution-Processed Indium Oxide Thin-Film Transistors

Ultraviolet Light-Densified Oxide-Organic Self-Assembled Dielectrics: Processing Thin-Film Transistors at Room Temperature

Modulating Contact Properties by Molecular Layers in Organic Thin‐film Transistors