Abstract:Work function difference induces spontaneous charge donation and band bending at the interfaces of superlattices, which is the origin of modulation doping and energy filtering, leading to remarkably enhanced thermoelectric performances. This optimizing strategy is successfully elucidated in 1T′‐MoTe2/Bi2Te3 superlattices. Meanwhile, the rational manipulation of interfacial band bending via tuning the Te/Bi flux ratio further promotes thermoelectric performances. Interfacial charge effects, such as band bending, modulation doping, and energy filtering, are critical for improving electronic transport properties of superlattice films. However, effectively manipulating interfacial band bending has proven challenging in previous studies. In this study, (1T′‐MoTe2)x(Bi2Te3)y superlattice films with symmetry‐mismatch were successfully fabricated via the molecular beam epitaxy. This enables to manipulate the interfacial band bending, thereby optimizing the corresponding thermoelectric performance. These results demonstrate that the increase of Te/Bi flux ratio (R) effectively tailored interfacial band bending, resulting in a reduction of the interfacial electric potential from ≈127 meV at R = 16 to ≈73 meV at R = 8. It is further verified that a smaller interfacial electric potential is more beneficial for optimizing the electronic transport properties of (1T′‐MoTe2)x(Bi2Te3)y. Especially, the (1T′‐MoTe2)1(Bi2Te3)12 superlattice film displays the highest thermoelectric power factor of 2.72 mW m−1 K−2 among all films, due to the synergy of modulation doping, energy filtering, and the manipulation of band bending. Moreover, the lattice thermal conductivity of the superlattice films is significantly reduced. This work provides valuable guidance to manipulate the interfacial band bending and further enhance the thermoelectric performances of superlattice films.

Low Contact Resistivity of Bi2Te3‐Based Films and Metals Interfaces Enabled by Orientation Regulation

Crystallographic Orientation Dependence of Dielectric Response in Lead Strontium Titanate Thin Films

Anisotropic Effects on the Thermoelectric Properties of Highly Oriented Electrodeposited Bi2Te3 Films

Carrier concentration and orientation optimization for high performance (Sb,Bi) 2 Te 3 thermoelectric films via magnetron co-sputtering

Localized Surface Doping Induced Ultralow Contact Resistance between Metal and (Bi,Sb)2Te3 Thermoelectric Films

Electrodeposition and thermoelectric characterization of (00L)-oriented Bi2Te3 thin films on silicon with seed layer

Composition-dependent characterization and optimal control of electrodeposited Bi2Te3 films for thermoelectric application

Effect of the interface on the mechanical properties and thermal conductivity of bismuth telluride films

Effects of Si Substrates with Variable Initial Orientations on the Growth and Thermoelectric Properties of Bi-Sb-Te Thin Films

Minimization of the electrical contact resistance in thin-film thermoelectric device

Enhanced Interfacial Adhesion and Thermal Stability in Bismuth Telluride/Nickel/Copper Multilayer Films with Low Electrical Contact Resistance

Enhancing the Triboelectric Charges and Manipulating the Resistance of a Te Thin Film

Manipulating the Interfacial Band Bending For Enhancing the Thermoelectric Properties of 1T′‐MoTe<sub>2</sub>/Bi<sub>2</sub>Te<sub>3</sub> Superlattice Films (Small 35/2023)

Effects of chemical intermixing on electrical and thermal contact conductances at metallized bismuth and antimony telluride interfaces

Enhancement of ZT in Bi0.5Sb1.5Te3 Thin Film through Lattice Orientation Management

Low-resistivity Ohmic contacts of Ti/Al on few-layered 1T'-MoTe2/2H-MoTe2 heterojunctions grown by chemical vapor deposition

Manipulating the Interfacial Band Bending For Enhancing the Thermoelectric Properties of 1T′‐MoTe2/Bi2Te3 Superlattice Films

Electrocrystallization Process During Deposition of Bi–Te Films

Thermal transport in Bi2Te3-PbTe segmented thermoelectric nanofilms

Nonvolatile and Reversible Ferroelectric Control of Electronic Properties of Bi2Te3 Topological Insulator Thin Films Grown on Pb(Mg1/3Nb2/3)O3-PbTiO3 Single Crystals.

Manipulating the Interfacial Band Bending for Enhancing the Thermoelectric Properties of 1T'-Mote2 /bi2 Te3 Superlattice Films.