Abstract:The development of organic–inorganic hybrid thin films structures to enhance detection efficiency has garnered significant attention. This outstanding performance can primarily be attributed to the advantages of long carrier lifetime and diffusion length, high light absorption coefficients, and low exciton binding energy. To better passivate the surface defects of the film layer and optimize the electron–hole layer, this paper proposes an effective method for enhancing the responsivity of sandwich metal-semiconductor-metal (MSM) type inorganic/organic photodetectors with a SiO 2 /ZnO/P3HT:PC 61 BM/Pt nanoparticles (NPs) structure. By modifying the Pt NPs deposited directly onto the sample to induce localized surface plasmon resonance (LSPR), the external quantum efficiency (EQE) of the photodetector (PD) is significantly improved across a broad wavelength range from 300 to 680 nm. The maximum responsivity of 0.51 A/W and photocurrent of 0.042 A occur at a wavelength of 375 nm in the SiO 2 /ZnO/P3HT:PC 61 BM/Pt NPs device. The response rise time of the SiO 2 /ZnO/P3HT:PC 61 BM/Pt NPs sample is 1.2 s, which is more than 5 times shorter than that of devices without Pt NPs treatment. At the same time, the dark current is reduced. The as-fabricated SiO 2 /ZnO/P3HT:PC 61 BM/Pt NPs sample was characterized using XRD, XPS, EDS, TEM, SEM, and AFM. These measurements demonstrate that the tunneling hole injection is enhanced by intensified energy level bending, induced by both trapped electrons in these aggregations and accumulated ones, as investigated through Poynting's theorem.

Passivation of surface states in the ZnO nanowire with thermally evaporated copper phthalocyanine for hybrid photodetectors

ZnO nanowire photodetectors based on Schottky contact with surface passivation

Non-aligned ZnO Nanowires Composited with Reduced Graphene Oxide and Single-Walled Carbon Nanotubes for Highly Responsive UV–visible Photodetectors

Enhanced performance of ZnO nanorod array/CuSCN ultraviolet photodetectors with functionalized graphene layers

Broadband photoresponse promoted by interfacial electron transfer in diketopyrrolopyrrole-based compound/ZnO hybrid nanocomposites

A Surface Oxide Thin Layer Of Copper Nanowires Enhanced The Uv Selective Response Of A Zno Film Photodetector

Photogating-controlled ZnO Photodetector Response for Visible to Near-Infrared Light.

Effective surface passivation of GaAs nanowire photodetectors by a thin ZnO capping

High Performance Charge-Transfer Induced Homojunction Photodetector Based on Ultrathin ZnO Nanosheet

Engineering of Interfacial Electron Transfer from Donor-Acceptor Type Organic Semiconductor to Zno Nanorod for Visible-Light Detection

Ultraviolet–visible photodetectors based on surface plasmon-polymer coupled inorganic/organic thin film heterojunction

Concurrent Improvement of Photocarrier Separation and Extraction in ZnO Nanocrystal Ultraviolet Photodetectors

Interfacial Electron Transfer of P3HT/PDI/ZnO Nanocomposite and Its Application in Visible-Light Detection

Enhanced Response Speed Of Zno Nanowire Photodetector By Coating With Photoresist

Interface Engineering on ZnO/Au Based Schottky Junction for Enhanced Photoresponse of UV Detector with TiO2 Inserting Layer

Performance Improvement of ZnO Nanowire Based Surface Acoustic Wave Ultraviolet Detector Via Poly(3,4-Ethylenedioxythiophene) Surface Coating

Enhanced performance of UV photodetector based on ZnO nanorod arrays via TiO2 as electrons trap layer

Enhancing Ultraviolet Photoresponse of Zno Nanowire Device by Surface Functionalization

Enhanced Photoelectric Performance in Self-Powered UV Detectors Based on ZnO Nanowires with Plasmonic Au Nanoparticles Scattered Electrolyte

Improved UV Photoresponse Performance of ZnO Nanowire Array Photodetector via Effective Pt Nanoparticle Coupling

Boosting performances of ZnO microwire homojunction ultraviolet self-powered photodetector by coupled interfacial engineering and plasmonic effects