Abstract:In this study, through reasonable composition design, three elements of Zn, Mn and Ca, which are harmless to human body, were selected for alloying magnesium. The effects of ECAP treatment on the microstructure and corrosion properties of Mg-4Zn-1Mn-0Ca, Mg-4Zn-1Mn-0.2Ca and Mg-4Zn-0Mn-0.2Ca alloys were studied. The corrosion mechanism of Mg-Zn-Mn-Ca alloys with different components in Simulated. Body fluid (SBF) was analyzed by weight loss method and electrochemical test. The grains and the second phase were refined by Equal Angular Channel Pressing (ECAP). It was found that after 8 ECAP deformations, the microstructure of the alloy was refined and more uniform than that of the extruded alloy. The corrosion resistance of the Mg-Zn-Mn-Ca alloy after ECAP deformation in simulated body fluids was studied by electrochemical testing techniques, immersion experiments and observation of the microstructure and morphology of corrosion products. The relationship between microstructure characteristics, the behavior of the magnesium metal matrix and the properties of corrosion products was revealed. The results show that the microstructure of the alloy is refined and the corrosion resistance is improved with the increase in extrusion passes in the SBF solution. The corrosion resistance of magnesium alloy after 8 ECAP deformation is the best, showing small Icorr and large Rt. With the extension of the soaking time, the surface of the alloy will form a passivation film, which will protect the matrix and avoid further corrosion of the alloy. It is found that in SBF, the corrosion of the alloy surface is mainly pitting, which indicates that Ca2+, HCO3- and HPO42(-) in SBF can reduce the corrosion rate of magnesium alloy.

Formation Mechanisms of Product Film on High Corrosion Resistant EW75 Mg Alloy: the Effect of Corrosive Media

Structure, Composition and Corrosion Resistance of Mg Alloy Anodized Film

The Corrosion Behaviors of Mg–7Gd–5Y–1Nd–0.5Zr Alloy under (NH4)2SO4, NaCl and Ca(NO3)2 Salts Spray Condition

Investigation of Corrosion Behaviors of Mg–6Gd–3Y–0.4Zr Alloy in NaCl Aqueous Solutions

Determination of corrosion product film on pure Mg in Cl − environment using XPS etching

Microstructure and Corrosion of Cast Magnesium Alloy ZK60 in NaCl Solution

Corrosion Behaviour of AM60 Magnesium Alloys Containing Ce or La under Thin Electrolyte Layers. Part 2: Corrosion Product and Characterization

Localized Corrosion of Magnesium Alloys in NaCl Solutions Explored by Scanning Electrochemical Microscopy in Feedback Mode

The Effects of ECAP, Mn and Ca Elements on the Microstructure and Corrosion Properties of Magnesium Alloys Were Investigated

Fabrication and corrosion property of conversion films on magnesium alloy from deep eutectic solvent

Effect of Chloride Ion Concentration on Electrochemical Behavior and Corrosion Product of Am60 Magnesium Alloy in Aqueous Solutions

Corrosion behavior and microstructure of the surface corrosion film of biodegradable WE43 and ZX21 Mg alloys in Hanks' balanced salt solution

In Situ Formation of Organophosphonate Film on Mg Alloy with Corrosion Inhibiting Behavior

Exfoliation Corrosion of As-Extruded Mg–1Li–1Ca: the Influence of the Superficial Layer

The Corrosion Behavior of Mg-9Al-xRE Magnesium Alloys Modified by Friction Stir Processing

Comparison on corrosion resistance and surface film of pure Mg and Mg−14Li alloy

The Electrochemical and Immersion Corrosion of Casting Magnesium Alloys Containing Rare Earth Elements

Study of the corrosion mechanism of Mg–Gd based soluble magnesium alloys with different initial texture states

Multi-scale study on the electrochemical behavior and corrosion mechanism of 5083 aluminum alloy with different microstructures in a NaCl environment

The Influence of Holding Time on Morphologies and Electrochemical Properties of MAO/LDH Composite Film on LA103Z Mg-Li Alloy

Influence of Mg substrate on the formation mechanism and corrosion resistance of LDH films