Abstract:Here, we reported some simulated atmospheric corrosion studies of magnesium alloy (including AZ91D and AM60) based on electrochemical impedance spectroscopy and polarization technology, and the effect of rare earth element Ce or La on corrosion behavior of magnesium alloy. In the case of AZ91D magnesium alloy, the electrochemical results reveal that the corrosion rate of AZ91D under thin electrolyte layers (TELs) is slower than that in bulk solution and decreases with the TEL thickness thinning. Bothe the anodic and cathodic reactions are restrained under TELs, especially in thickness thinning to around 200 μm and lower. For AM60 magnesium alloy and pure magnesium, the corrosion processes are also inhibited by decreasing thickness of TEL. All those corrosion rates and behavior of magnesium and its alloy are different from that of aluminum, copper and zinc alloy, which are due to the special cathodic reaction for magnesium alloy. Rare earth elements Ce or La have a strong effect on the dissolution of AM60 magnesium alloy under TEL. Typical impedance diagrams consist of two capacitive arcs at high and intermediate frequencies in all cases. At low frequencies, an arc or tail in the Nyquist plots appears sometimes disappears due to the complex corrosion reaction. Comparing to AM60, AM60 with rare earth element addition presents the 3rd capacitive loop sometimes instead of an inductive tail under the TEL thicknesses of 200 and 300 μm, which is associated with reaction taking place on the cathodic intermetallic compounds formed with rare earth elements. The EIS and polarization measurements indicate the rare earth element alloying can reduce corrosion rate of AM60 and AZ91D both under TEL and in bulk electrolyte.

Effect of Chloride Ion Concentration on Electrochemical Behavior and Corrosion Product of Am60 Magnesium Alloy in Aqueous Solutions

Effects of NaAlO2 on Structure and Corrosion Resistance of Microarc Oxidation Coatings Formed on AM60B Magnesium Alloy in Phosphate–koh Electrolyte

Electrochemical Impedance Fractal Study of AM60 Magnesium Alloy in Aggressive Solution

Corrosion behavior of magnesium and its alloy in NaCl solution

Corrosion Behavior of AZ91D Magnesium Alloy in Acidic Solution of NaCl

Corelative study of Mott―Schottky analysis and corrosion behaviour of plasma electrolytic oxidation treated magnesium alloy: Effect of Cl⎺ concentrations

Corrosion Behaviour of AM60 Magnesium Alloys Containing Ce or La under Thin Electrolyte Layers. Part 1: Microstructural Characterization and Electrochemical Behaviour

Microstructure and Corrosion of Cast Magnesium Alloy ZK60 in NaCl Solution

Corrosion behavior of anodized AZ91D magnesium alloy in NaCl aqueous solution

Comparison of Corrosion Behaviors of AZ31, AZ91, AM60 and ZK60 Magnesium Alloys

Localized Corrosion of Magnesium Alloys in NaCl Solutions Explored by Scanning Electrochemical Microscopy in Feedback Mode

Influence of Cl− Concentration on Corrosion Performance of Cu-Al Layered Composite Plate

Effect of Solid-Solution Treatment on Corrosion and Electrochemical Behaviors of Mg-15Y Alloy in 3.5 Wt.% NaCl Solution

Magnesium Alloy Corrosion under Thin Electrolyte Layer Using Electrochemical Impedance Spectroscopy and Polarization Curve

Multi-scale study on the electrochemical behavior and corrosion mechanism of 5083 aluminum alloy with different microstructures in a NaCl environment

Polarization Behavior of Magnesium Alloy AZ91D with Micro-Arc Oxidation Coating in NaCl Solution

The Corrosion Behavior of AZ91D Magnesium Alloy in Simulated Haze Aqueous Solution

Exploring the Corrosion Performance of AZ31 Magnesium Alloy under Acidic and Alkaline Conditions

Unveiling the effect of Al-Mn intermetallic on the micro-galvanic corrosion of AM50 Mg alloy in NaCl solution

Corrosion Behaviour of AM60 Magnesium Alloys Containing Ce or La under Thin Electrolyte Layers. Part 2: Corrosion Product and Characterization

Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy