Abstract:Highlights • The formation of MgO occurs at the boundary between magnesium and MgO and involves the movement of an oxygen ion through the oxide film. • A new hydroxide layer is formed on the surface of the oxide film due to oxide hydrolysis and water reduction. • The mechanism of the recrystallization process is the dissolution of amorphous or finely dispersed hydroxide. • The corrosion rate of pure magnesium in sulfate solutions is high the mechanism of the process does not provide sufficient passivation of the metal by products. Studies have been conducted on the corrosive behavior of magnesium in aqueous sulfate electrolytes (0.5 mol/L MgSO 4 ; 0.5 mol/L Na 2 SO 4 ; 0.5 mol/L MgSO 4 + 0.5 mol/L Na 2 SO 4 ). The composition structure and morphology of the surface of the samples were studied using scanning electron microscopy in combination with X-ray spectral microanalysis. The results of the experiments showed the formation of a surface film inhomogeneous in its structure and composition with the main components Mg(OH) 2 and MgO. An increase in the exposure time of the electrode in solution led to the formation of microcracks on the main film caused by internal stress because of hydration of magnesium oxide produced during corrosion. The salt composition of the electrolyte determines the morphology and thickness of corrosion films due to differences in the solubility of the products formed during the hydrolysis of magnesium oxide and the kinetics of this process. Applying the methods of scanning electron microscopy X-ray electron analysis gravimetry and voltammetry it has been established that at various stages of magnesium corrosion in different electrolytes the growth rates of corrosion films are determined by the kinetics of magnesium oxide formation its hydration and dissolution followed by crystallization in the form of a brucite phase of loose sediments on the surface.

Determination of corrosion product film on pure Mg in Cl − environment using XPS etching

Electrochemical and Corrosion Behaviors of Pure Mg in Neutral 1.0% Nacl Solution

Comparison on corrosion resistance and surface film of pure Mg and Mg−14Li alloy

Electrolytic Etching of AZ91D Mg Alloy in AlCl3–EMIC Ionic Liquid for the Electrodeposition of Adhesive Al Coating

Electrochemical, TOF-SIMS and XPS Studies on the Corrosion Behavior of Q-phase in NaCl Solutions As a Function of Ph

Multi-scale study on the electrochemical behavior and corrosion mechanism of 5083 aluminum alloy with different microstructures in a NaCl environment

CORROSION BEHAVIOR OF PURE MAGNESIUM IN NEUTRAL 1.0mass. % NaCI SOLUTIONS

Corrosion Behavior of Pure Mg Based on Generation/Collection and Feedback Modes of Scanning Electrochemical Microscopy

Microstructure and Corrosion of Cast Magnesium Alloy ZK60 in NaCl Solution

Exploring the Corrosion Performance of AZ31 Magnesium Alloy under Acidic and Alkaline Conditions

Localized Corrosion of Magnesium Alloys in NaCl Solutions Explored by Scanning Electrochemical Microscopy in Feedback Mode

The Corrosion Behavior of AZ91D Magnesium Alloy in Simulated Haze Aqueous Solution

Study of the corrosion mechanism of Mg–Gd based soluble magnesium alloys with different initial texture states

Characterization of surface films formed on molten magnesium in atmospheres containing SO 2

In Situ Formation of Organophosphonate Film on Mg Alloy with Corrosion Inhibiting Behavior

Structure, Composition and Corrosion Resistance of Mg Alloy Anodized Film

In-situ AFM and quasi-in-situ studies for localized corrosion in Mg-9Al-1Fe-(Gd) alloys under 3.5 wt.% NaCl environment

Effect of Chloride Ion Concentration on Electrochemical Behavior and Corrosion Product of Am60 Magnesium Alloy in Aqueous Solutions

Electrochemical Impedance Fractal Study of AM60 Magnesium Alloy in Aggressive Solution

Corrosion behavior of magnesium in aqueous sulfate-containing electrolytes

Exfoliation Corrosion of As-Extruded Mg–1Li–1Ca: the Influence of the Superficial Layer