Abstract:Here, we reported some simulated atmospheric corrosion studies of magnesium alloy (including AZ91D and AM60) based on electrochemical impedance spectroscopy and polarization technology, and the effect of rare earth element Ce or La on corrosion behavior of magnesium alloy. In the case of AZ91D magnesium alloy, the electrochemical results reveal that the corrosion rate of AZ91D under thin electrolyte layers (TELs) is slower than that in bulk solution and decreases with the TEL thickness thinning. Bothe the anodic and cathodic reactions are restrained under TELs, especially in thickness thinning to around 200 μm and lower. For AM60 magnesium alloy and pure magnesium, the corrosion processes are also inhibited by decreasing thickness of TEL. All those corrosion rates and behavior of magnesium and its alloy are different from that of aluminum, copper and zinc alloy, which are due to the special cathodic reaction for magnesium alloy. Rare earth elements Ce or La have a strong effect on the dissolution of AM60 magnesium alloy under TEL. Typical impedance diagrams consist of two capacitive arcs at high and intermediate frequencies in all cases. At low frequencies, an arc or tail in the Nyquist plots appears sometimes disappears due to the complex corrosion reaction. Comparing to AM60, AM60 with rare earth element addition presents the 3rd capacitive loop sometimes instead of an inductive tail under the TEL thicknesses of 200 and 300 μm, which is associated with reaction taking place on the cathodic intermetallic compounds formed with rare earth elements. The EIS and polarization measurements indicate the rare earth element alloying can reduce corrosion rate of AM60 and AZ91D both under TEL and in bulk electrolyte.

The Electrochemical and Immersion Corrosion of Casting Magnesium Alloys Containing Rare Earth Elements

Electrochemical behaviour of a magnesium alloy containing rare earth elements

Susceptibility of rare-earth-magnesium alloys to micro-galvanic corrosion

On the corrosion of binary magnesium-rare earth alloys

Rare Earth Based Magnesium Alloys—A Review on WE Series

Studies on Corrosion Behavior of Mg-Al-Zn-RE Cast Alloy with Powder-Coated Al and CED Mg by Salt Spray Test, Immersion Test, and Electrochemical Test

Electrochemical corrosion behaviour of stir cast and heat-treated EV31A magnesium alloy in different electrolytic mediums

Investigation of Corrosion Behaviors of Mg–6Gd–3Y–0.4Zr Alloy in NaCl Aqueous Solutions

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys

Biodegradation of Az31 and We43 Magnesium Alloys in Simulated Body Fluid

Comparative Study on Corrosion Behavior of As-Cast and Extruded Mg–5Y–7Gd–1Nd–0.5Zr Alloy in 5% NaCl Aqueous Solution

Role of Rare Earth Gadolinium and ZnO Nanoparticles on the Electrochemical Corrosion Behavior of Mg Nanocomposites Produced by Stir-Ultrasonication and Squeeze Casting

The Corrosion Behavior of Mg-9Al-xRE Magnesium Alloys Modified by Friction Stir Processing

Magnesium Alloy Corrosion under Thin Electrolyte Layer Using Electrochemical Impedance Spectroscopy and Polarization Curve

Effect and Application of Rare Earth Element in Magnesium Alloys

Corrosion-Resistant Electrochemical Platings on Magnesium Alloys: A State-of-the-Art Review

Corrosion behaviour of friction stir welded rare earth magnesium alloy ZE41 under salt spray test

Electrochemical Behavior of ZE41 Magnesium Alloy under Simulated Atmospheric Corrosion

The sequential migration of rare earth elements (REE) in WE43 magnesium alloy during anodic oxidation treatment

Improvement of corrosion resistance of magnesium metal by rare earth elements

Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy