Abstract:The present research explores the electrochemical corrosion characteristics of Mg–Zn–Gd (rare earth—RE) alloy and Mg–Zn–Gd–ZnO nanocomposites. A unique stir-ultrasonication followed by squeeze casting technique was used to develop the alloy and nanocomposites. T5 heat-treated Mg alloys and Mg nanocomposite samples were subjected to an electrochemical corrosion test in a solution of 3.5 wt.% NaCl-concentrated demineralized water. The addition of Gd alloying element and ZnO nanoreinforcements combined with squeeze casting led to the finer grains in the Mg nanocomposites. Scanning electron microscopy (SEM) images validate the homogeneous dispersion of nano-ZnO in the Mg matrix. The MgZn precipitates were observed in X-ray diffraction analysis (XRD) peaks and Transmission electron microscopy (TEM) analysis. The hardness results revealed a 34% enhancement in the microhardness of the nanocomposite with 0.2% Gd and 2% ZnO as compared to the base alloy. Electrochemical impedance spectroscopy analysis was performed on the fabricated samples to identify the instantaneous corrosion effect. The reduction in the removal of metal ions was observed during the electrochemical test with a voltage range of − 0.5 to 0.5 V and a 1.92E−05 A/cm 2 current density at 1800 s. The enhanced corrosion resistance observed in nanocomposites could be attributed to the presence of a finer grain arrangement, good interfacial strength, and the formation of passivation layers and precipitates in the nanocomposite samples.

Studies on Corrosion Behavior of Mg-Al-Zn-RE Cast Alloy with Powder-Coated Al and CED Mg by Salt Spray Test, Immersion Test, and Electrochemical Test

Corrosion Resistance of Die Casting Magnesium Alloy Treated by Different Surface Treatment Methods

Preparation and properties of nano ZrO2 coating on magnesium alloy

Enhanced Electrochemical and Tribological Properties of AZ91D Magnesium Alloy via Cold Spraying of Aluminum Alloy

Wear and Corrosion Properties of 316L-SiC Composite Coating Deposited by Cold Spray on Magnesium Alloy

Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy

About some corrosion mechanisms of AZ91D magnesium alloy

The Electrochemical and Immersion Corrosion of Casting Magnesium Alloys Containing Rare Earth Elements

Comparative Study on Corrosion Behavior of As-Cast and Extruded Mg–5Y–7Gd–1Nd–0.5Zr Alloy in 5% NaCl Aqueous Solution

Role of Rare Earth Gadolinium and ZnO Nanoparticles on the Electrochemical Corrosion Behavior of Mg Nanocomposites Produced by Stir-Ultrasonication and Squeeze Casting

Microstructural homogeneity, texture and corrosion properties of RE-doped 55Mg-35Pb-9.2Al-0.8B alloy fabricated via equal channel angular pressing (ECAP)

Corrosion Behavior of Zrn/Zr Coated Biomedical Az91 Magnesium Alloy

Tuning Corrosion Properties of the Bio-Inspired AZ-Series Mg Alloys Using Electrochemical Surface Treatment under Varying Experimental Regimes

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

Preparation of Conductive and Corrosion Resistant Phosphate Conversion Coating on AZ91D Magnesium Alloy

Superhydrophobic Corrosion-Resistant Coating of AZ91D Magnesium Alloy: Preparation and Performance

Corrosion resistance of AZ91D magnesium alloy with electroless plating pretreatment and Ni–TiO2 composite coating

Grain Refinement Promotes the Formation of Phosphate Conversion Coating on Mg Alloy AZ91D with High Corrosion Resistance and Low Electrical Contact Resistance

Effects of zirconium addition on electrochemical and mechanical properties of Mg-3Zn-1Ca-1RE alloy

PREPARATION AND CORROSION ELECTROCHEMISTRY BEHAVIOR OF CERIUM-BASED CHEMICAL CONVERSION COATING ON AZ91 MAGNESIUM ALLOY

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys