Abstract:Magnesium rare-earth (Mg-RE) alloys have great potential in lightweight applications because of the high specific strength. Wire-arc directed energy deposition (WA-DED) exhibits great prospects for the fabrication of large-scale monolithic structural components with high manufacturing flexibility. In this work, a single-pass multilayer Mg‐10Gd‐3Y‐1Zn‐0.5Zr (wt%, GWZ1031K) deposit was prepared via WA-DED. Electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) are conducted to systematically explore the microstructural evolution during the WA-DED process and the subsequent heat treatment . The GWZ1031K alloy deposit fabricated by WA-DED exhibits uniform equiaxed grain structure whose average grain size is 22.3 ± 5.6 μm. The (Mg,Zn) 3 (Gd,Y) phase and RE segregation can be observed along the α-Mg grain boundaries (GBs). A number of needle-like γ ́ /γ ́ ́ phases embedded in the α-Mg grain interior (GI). In addition, there is a small number of fine RE-rich cubic phase and (Gd,Y) 2 O 3 particles. The deposit shows significantly enhanced ductility and slightly improved strength after solution treated at 500 °C for 12 h. After the solution treatment, the intergranular (Mg,Zn) 3 (Gd,Y) eutectics dissolve into the matrix and long period stacking ordered (LPSO) phases precipitate from the GBs into the GI, contributing to the enhancement in ductility. Besides, the LPSO phase along with the existing RE-rich cubic phase, (Gd,Y) 2 O 3 and Zr particles at GBs also play a role in hindering grain growth. The high-density nanoscale β ́ phases appear in the GI after aging treated at 200 °C for 24 h, resulting in the remarkable precipitation strengthening. In comparison with the solution-treated GWZ1031K deposit, the aging-treated exhibits a prominently improved ultimate tensile strength of 337 ± 7 MPa in the building direction (BD) and 331 ± 5 MPa in the travelling direction (TD). It is envisaged that the WA-DED manufacturing method will provide a simple and effective route to fabricate large-scale Mg-RE alloy components for various applications.

Microstructural homogeneity, texture and corrosion properties of RE-doped 55Mg-35Pb-9.2Al-0.8B alloy fabricated via equal channel angular pressing (ECAP)

Microstructure evolution and corrosion properties of ECAPed Mg–Pb-9.2Al-0.8B alloys

Anisotropy investigation of an ECAP-processed Mg-Al-Ca-Mn alloy with synergistically enhanced mechanical properties and corrosion resistance

Microstructure and mechanical properties of the Mg98.5Zn0.5RE1 (RE=Gd and/or Y) alloys processed by equal channel angular pressing

Effects of Different Rare Earth Elements on the Degradation and Mechanical Properties of the ECAP Extruded Mg Alloys

Influence of mixed rare earth elements(Y and Ce) on the microstructure and corrosion behaviour of Mg-4Al-3Ca alloy

The Effects of ECAP, Mn and Ca Elements on the Microstructure and Corrosion Properties of Magnesium Alloys Were Investigated

Microstructural evolution and mechanical response of duplex Mg-Li alloy containing particles during ECAP processing

Excellent isotropic mechanical properties of directed energy deposited Mg-Gd-Y-Zr alloys via establishing homogeneous equiaxed grains embedded with dispersed nano-precipitation

Influence of rare earth addition on microstructures and mechanical properties of high-pressure die casting Mg–8Zn–6Al alloy

Correlation of microstructure, mechanical properties and corrosion behavior in a Ni34Co28Cr28Al10 multi-principal element alloy with outstanding corrosion resistance

A High-Strength and Biodegradable Zn–Mg Alloy with Refined Ternary Eutectic Structure Processed by ECAP

Revealing precipitation behavior and mechanical response of wire-arc directed energy deposited Mg-Gd-Y-Zr alloy by tailoring aging procedures

Effects of Zn Addition on Microstructural Evolution, Mechanical Properties and Corrosion Resistance of Al-6Mg Alloy Subjected to ECAP Processing at 200 ℃

Studies on Corrosion Behavior of Mg-Al-Zn-RE Cast Alloy with Powder-Coated Al and CED Mg by Salt Spray Test, Immersion Test, and Electrochemical Test

Microstructure evolution and mechanical properties of Mg–Mn–RE alloy processed by equal channel angular pressing

Improving In-Vitro Corrosion and Degradation Performance of Mg–Zn–Ca Alloy for Biomedical Applications by Equal Channel Angular Pressing

Precipitation behaviors and mechanical properties of a solution-treated Mg-Gd-Nd-Zn-Zr alloy during equal-channel angular pressing process

Mechanical Properties of Biomedical Ultrafine Grained Mg-3Sn-0.5Mn Alloy Processed by Equal-Channel Angular Pressing

Preparing high-strength and osteogenesis-induced Mg-Gd alloy with ultra-fine microstructure by equal channel angular pressing

High-strength Mg‐10Gd‐3Y‐1Zn‐0.5Zr alloy fabricated by wire-arc directed energy deposition: Phase transformation behavior and mechanical properties