Abstract:Magnesium (Mg) and its alloys are one of the highly sought after structural material due to its lowest density among the structural material. Various attempts are being made by researchers to improve the mechanical performance of Mg alloys to widen their scope of application domains, especially in defence and biomedical sectors. On the development of Mg matrix composites, various works are reported on adding ceramic-based reinforcement which is proven to improve the strength of the material, but at the cost of ductility. With the research attempt on developing metallic reinforcement-based Mg composites being scarce, the scope of developing such composite material with superior strength and ductility is huge. Nickel has zero-solubility in Mg, high melting point and few closely matching lattice spacing with Mg crystal, which enabled simultaneous crystallization of Mg, with Ni acting as nucleation sites, and helped refining the microstructure. In the present research work, an attempt is made to incorporate 5 Wt.% of sub-micron-Ni particulate as reinforcement in developing an AZ31 matrix composite through stir casting route. A field emission scanning electron microscope and optical microscope was used to give the detailed analysis on the microstructural evaluation of the cast AZ31 alloy and the developed composite. Elemental mapping was done to confirm the uniform distribution of Ni particles throughout the magnesium matrix. The influence of reinforcement on the mechanical properties of the composites were investigated. The composite displayed improved properties when compared to the base alloy in terms of hardness, yield strength and ultimate tensile strength. The hardness of the composite was found to be 68.4HV, whereas the base alloy had a hardness of 53HV. The ultimate tensile strength (UTS) for the AZ31/Ni composite was greater than 50% when compared with the base alloy. Fractography study revealed the type of fracture of the base alloy and the composite.

Role of Rare Earth Gadolinium and ZnO Nanoparticles on the Electrochemical Corrosion Behavior of Mg Nanocomposites Produced by Stir-Ultrasonication and Squeeze Casting

Tensile strength and immersion corrosion behavior of nano-ZnO, rare earth Gd reinforced Mg nanocomposites developed by novel stir ultrasonication process

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys

Effect of Mg on Al-Mg Alloy and Electroless Ni-P Codeposition of nano-Al2O3: Mechanical, Wear, and Corrosion Resistance Properties

Studies on Corrosion Behavior of Mg-Al-Zn-RE Cast Alloy with Powder-Coated Al and CED Mg by Salt Spray Test, Immersion Test, and Electrochemical Test

Corrosion Behavior and Surface Modification of Mg-Zn Implant Alloys

Investigation of Corrosion Behaviors of Mg–6Gd–3Y–0.4Zr Alloy in NaCl Aqueous Solutions

Construction of ZnONRs-PDA/PMPC nanocomposites on the surface of magnesium alloy with enhanced corrosion resistance and antibacterial performances

The Electrochemical and Immersion Corrosion of Casting Magnesium Alloys Containing Rare Earth Elements

Comparative Study on Corrosion Behavior of As-Cast and Extruded Mg–5Y–7Gd–1Nd–0.5Zr Alloy in 5% NaCl Aqueous Solution

Improvement of corrosion resistance of magnesium metal by rare earth elements

Alloying and Brushite Coating Improve Corrosion Resistance of Magnesium in a Simulated Physiological Environment

Development of rare-earth oxide reinforced magnesium nanocomposites for orthopaedic applications: A mechanical/immersion/biocompatibility perspective

Study of the corrosion mechanism of Mg–Gd based soluble magnesium alloys with different initial texture states

Enhanced corrosion performance of ultrasonically shot peened and graphene nanoparticles reinforced squeeze-cast AZ91 magnesium alloy

Influence of crystalline Zn-Ag nanoalloy electrodeposits on their anti-corrosion and hardness performance in engineering applications

Synchronous improvement in mechanical properties and corrosion resistance of Mg-Gd-Ag-Zr alloy through nanoprecipitates

Effects of zirconium addition on electrochemical and mechanical properties of Mg-3Zn-1Ca-1RE alloy

Effects of Different Rare Earth Elements on the Degradation and Mechanical Properties of the ECAP Extruded Mg Alloys

Role of Nickel Particulate Reinforcement on Microstructure and Mechanical Performance of AZ31 Magnesium Composite

Enhanced Corrosion Resistance and Mechanical Properties of Mg-Zn Alloy via Micro-alloying of Ge