Abstract:The microstructures and corrosion behaviors of as-cast, T4-treated, and T6-treated Mg-6Gd-3Y-0.5Zr alloys were systematically investigated by SEM, TEM, immersion test, and electrochemical corrosion test. The results show that the microstructure of the as-cast alloy is composed of α-Mg and Mg 24 (Gd, Y) 5 eutectic phase, and in T4-treated alloy, Mg 24 (Gd, Y) 5 phase dissolves into the α-Mg matrix, leading to an increase in the (Y, Gd)H 2 phase. After T6 treatment, nanoscale Mg 24 (Gd, Y) 5 phase dispersedly precipitates from the α-Mg matrix, and exhibits a specific orientation relationship with the . The corrosion resistance of the Mg-6Gd-3Y-0.5Zr alloys can be ranked in the following order: T6-treated alloy exhibits the highest corrosion resistance, followed by the T4-treated alloy, and finally, the as-cast alloy. The corrosion products of the alloys are all composed of MgO, Mg(OH) 2 , Gd 2 O 3 , Y 2 O 3 , and MgCl 2 . The corrosion behavior of Mg-6Gd-3Y-0.5Zr alloy is closely related to the precipitated phase. By establishing the relationship between corrosion rate, hydrogen evolution rate, and corrosion potential, it is further demonstrated that during the micro galvanic corrosion process, the coarse Mg 24 (Gd, Y) 5 phase in the as-cast alloy undergoes extensive dissolution, and (Y, Gd)H 2 phase promotes the dissolution of the α-Mg matrix in the T4-treated alloy, intensifying the hydrogen evolution reaction. The T6-treated alloy, with dispersive precipitation of nanoscale Mg 24 (Gd, Y) 5 phase, exhibits better corrosion resistance performance.

Investigation of Corrosion Behaviors of Mg–6Gd–3Y–0.4Zr Alloy in NaCl Aqueous Solutions

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys

Corrosion Behavior of Mg-Zn-Y-Zr Alloys in Nacl Solution

The Corrosion Behaviors of Mg–7Gd–5Y–1Nd–0.5Zr Alloy under (NH4)2SO4, NaCl and Ca(NO3)2 Salts Spray Condition

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Effect of heat treatment on corrosion behaviors of Mg-6Gd-3Y-0.5Zr alloy

Comparative Study on Corrosion Behavior of As-Cast and Extruded Mg–5Y–7Gd–1Nd–0.5Zr Alloy in 5% NaCl Aqueous Solution

Microstructure and Corrosion of Cast Magnesium Alloy ZK60 in NaCl Solution

Effect of grain size and crystal orientation on the corrosion behavior of as-extruded Mg-6Gd-2Y-0.2Zr alloy

Study on the Microstructure and Corrosion Behavior of Mg–(4 − X)gd–xy–2zn (x = 0, 2, 4 Wt%) Alloy

Influence of Phase Dissolution and Hydrogen Absorption on the Stress Corrosion Cracking Behavior of Mg-7%Gd-5%Y-1%Nd-0.5%Zr Alloy in 3.5 Wt.% NaCl Solution

Study of the corrosion mechanism of Mg–Gd based soluble magnesium alloys with different initial texture states

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Comparison of the Corrosion Behaviors of Mg–Gd–Y–Zn–Zr Alloys Fabricated by Different Preparation Methods

In Vitro Corrosion Mechanism of Biodegradable Mg-Zn-Gd Alloy

Comparison of Corrosion Performance of Extruded and Forged WE43 Mg Alloy

Structural characteristics and corrosion behavior of biodegradable Mg-Zn, Mg-Zn-Gd alloys

Improving the corrosion resistance of MgZn1.2Gd Zr0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions

Effect of Solid-Solution Treatment on Corrosion and Electrochemical Behaviors of Mg-15Y Alloy in 3.5 Wt.% NaCl Solution

Corrosion Behaviors for Peak-Aged Mg–7Gd–5Y–1Nd–0.5Zr Alloys with Oxide Films

Corrosion behavior and mechanical degradation of as-extruded Mg-Gd-Zn-Zr alloys for orthopedic application