Abstract:The dynamic loading in human body, along with the corrosive body fluid, presents a great challenge for the practical use of biodegradable magnesium implants. In this study, a high purity magnesium (99.99wt.%) and two typical promising biodegradable magnesium alloys (binary Mg-1Ca and ternary Mg-2Zn-0.2Ca) were chosen as the experimental materials. Their dynamic mechanical performances were comparatively evaluated by carrying out fatigue tests in air and in simulated body fluid (SBF). The fatigue strengths of HP-Mg, Mg-1Ca and Mg-2Zn-0.2Ca were all around 90MPa in air, however, they decreased to 52MPa, 70MPa and 68MPa in SBF at 4×10(6)cycles, respectively. The fatigue cracks initiated from the microstructural defects when tested in air, but nucleated from surface corrosion pits when tested in SBF. Cyclic loading significantly increased the corrosion rates of all the experimental materials compared to that in static SBF. Moreover, based on our findings, the fatigue failure processes and interactions between material, corrosion and cyclic loading were systematically discussed. Statement of significance: Fatigue strength and life are vital parameters to the design of metallic implant devices. For the corrosion fatigue of biomedical magnesium alloys, we reported the corrosion fatigue behavior of AZ91D and WE43 in SBF (Acta Biomaterialia, 6 (2010) 4605-4613), and till now there is no other reports to our knowledge. We spent 3years to finish the fatigue testing and get S-N curves for three more magnesium biomaterials, and our significant finding is that the fatigue strengths of HP-Mg, Mg-1Ca and Mg-2Zn-0.2Ca are all around 90MPa in air but 52MPa, 70MPa and 68MPa in SBF at 4×10(6)cycles, which will provide the first-hand data for the future magnesium implants design.

Biodegradation of Az31 and We43 Magnesium Alloys in Simulated Body Fluid

Corrosion Fatigue Behaviors of Two Biomedical Mg Alloys-Az91d and We43-In Simulated Body Fluid

In vitro degradation and biocompatibility of WE43, ZK60, and AZ91 biodegradable magnesium alloys

Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids

Corrosion Products on Biomedical Magnesium Alloy Soaked in Simulated Body Fluids

Influence of Artificial Biological Fluid Composition on the Biocorrosion of Potential Orthopedic Mg-Ca, Az31, Az91 Alloys

Influence of Heat Treatment on Degradation Behavior of Bio-Degradable Die-Cast AZ63 Magnesium Alloy in Simulated Body Fluid

Comparative Study on Corrosion Behaviour of Pure Mg and We43 Alloy in Static, Stirring and Flowing Hank'S Solution

Electrochemical Behavior Al[sub 2]o[sub 3]∕al Coated Surgical AZ91 Magnesium Alloy in Simulated Body Fluids

In Vitro Corrosion Behavior of Zn3Mg0.7Y Biodegradable Alloy in Simulated Body Fluid (SBF)

In vitro corrosion and biocompatibility of phosphating modified WE43 magnesium alloy

Study on Biodegradation Behavior of AZ31 Magnesium Alloy

Effects of Inorganic Ions, Organic Particles, Blood Cells, and Cyclic Loading on in Vitro Corrosion of Mg Al Alloys

The Corrosion Behavior of AZ91D Magnesium Alloy in Simulated Haze Aqueous Solution

Degradation Behavior of Medical MgZZC-1 in Various Simulated Body Fluids

In vitro bio-corrosion behaviors of biodegradable AZ31B magnesium alloy under static stresses of different forms and magnitudes

Fatigue behaviors of HP-Mg, Mg-Ca and Mg-Zn-Ca biodegradable metals in air and simulated body fluid

Degradation Behavior Of Micro-Arc Oxidized Zk60 Magnesium Alloy In A Simulated Body Fluid

Study on the blood compatibility and biodegradation properties of magnesium alloys

Surface characterization and cytotoxicity response of biodegradable magnesium alloys

Influence of Heat Treatment on the Corrosion Behavior of Purified Magnesium and AZ31 Alloy