Abstract:Magnesium is very light metal which possesses many useful properties, such as a high strength to weight ratio and good electrical and thermal conductivity. Magnesium and its alloys can be used in implant surgery as biodegradable materials. Taking into account the rapid degradation process of Mg alloys in chloride-containing solutions and the very complex composition of human body media, it is worthwhile to study the mechanism and kinetics of Mg alloy corrosion in solutions which closely resemble those of human body fluids. A comparative analysis of the corrosion activity of MA8 magnesium alloy (intended to be a bioresorbable material) in a medium for the cultivation of mammalian cells (minimum essential medium, MEM) and 0.83% NaCl solution was performed using the scanning vibrating electrode technique; local pH measurements; hydrogen evolution tests; and OCP, PDP, and EIS tests. Corrosion products formed on the alloy surface were characterized using XRD, SEM-EDX analysis and Raman spectroscopy. The hydrogen evolution rate was higher for samples in NaCl solution compared with MEM. The impedance modulus in the frequency range from 105 Hz down to 10−1 Hz for the sample immersed in MEM was higher than that for the sample immersed in NaCl. This indicates higher protective ability of the corrosion film formed in MEM compared to that formed during immersion in NaCl solution. Ca- and P-rich deposits were formed in the corrosion layer. The model of corrosion mechanism of MA8 magnesium alloy in MEM, which includes three stages of the development of corrosion product film, is hereby proposed. The corrosion product layer formation on the surface of the magnesium alloy sample in MEM), which included magnesium-substituted hydroxyapatite, stabilized the local pH below 9.0 and, along with the organic acids, did not allow the pH to increase during the corrosion of the Mg alloy. The obtained results indicate the prospect of using bioresorbable magnesium in implant surgery [1,2].

Corrosion Products on Biomedical Magnesium Alloy Soaked in Simulated Body Fluids

Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids

Biodegradation of Az31 and We43 Magnesium Alloys in Simulated Body Fluid

Corrosion Behavior in Magnesium-Based Alloys for Biomedical Applications

Degradation behavior of pure Mg in the physiological medium and growth mechanism of surface corrosion product films

Corrosion behavior and microstructure of biomedical Mg-Zn-Mn-Gd alloys

Effect of Microstructure and Texture on Corrosion Resistance of Magnesium Alloy

Electrochemical Behavior Al[sub 2]o[sub 3]∕al Coated Surgical AZ91 Magnesium Alloy in Simulated Body Fluids

Corrosion Resistance and Cytocompatibility of Biodegradable Surgical Magnesium Alloy Coated with Hydrogenated Amorphous Silicon.

Microstructure and Corrosion Behavior of Coated AZ91 Alloy by Microarc Oxidation for Biomedical Application

Corrosion Behavior of Zrn/Zr Coated Biomedical Az91 Magnesium Alloy

Degradation Behavior of Medical MgZZC-1 in Various Simulated Body Fluids

Corrosion Fatigue Behaviors of Two Biomedical Mg Alloys-Az91d and We43-In Simulated Body Fluid

Localized Corrosion Degradation of Bioresorbable Mg Alloys Promising for Medicine

Biocorrosion behavior of magnesium alloy in different simulated fluids for biomedical application

Effects of Inorganic Ions, Organic Particles, Blood Cells, and Cyclic Loading on in Vitro Corrosion of Mg Al Alloys

Biodegradable Behaviors of Az31 Magnesium Alloy in Simulated Body Fluid

Surface characterization and cytotoxicity response of biodegradable magnesium alloys

Research Progress on Corrosion Fatigue Behavior of Biomedical Degradable Magnesium-Based Alloys

Corrosion Degradation of AXJ530 Magnesium Alloy in Simulated Pysiological Fluid and Its Mitigation by Fluoride and Chitosan Coatings for Osteosynthetic Applications

Influence of Artificial Biological Fluid Composition on the Biocorrosion of Potential Orthopedic Mg-Ca, Az31, Az91 Alloys