Abstract:Hot rolling of steels represents one of the most critical steps to achieve finished products with high surface quality. The increasing productivity added to the rising customer requirements result in more and more severe scheduling rules for the HSM. Strip surface aspect is very important in terms of HSM operation costs and productivity limitation. Among all surface defects, the most crippling comes from the oxide scale formed at the surface of the steel during the hot rolling, at the entry of the finishing mill (last part of the hot strip mill): the secondary scale, mechanical behaviour of which is still poorly known. The secondary scale may fracture under the stresses imposed by the successive rolling passes, and can be embedded in the steel strip surface: this defect is called "rolled-in scale defect". In addition, the extrusion of the subjacent metal inside the oxide cracks induces large local modifications of friction and heat transfer conditions. Consequently, a precise description of oxide scale deformation mechanisms is necessary to better define the boundary conditions in a roll bite and to better understand the initiation mechanisms of rolled-in scale defects. Our scientific objective is then to provide a realistic physical and numerical model to simulate the oxide scale flow in the roll bite and in particular, its damage. After the presentation of the industrial process and the context of this study, the physical and mechanical properties of the oxide scale in the finishing mill are investigated. We introduce the Forge2® finite element software, selected for this study to simulate the oxide scale behaviour in a finishing mill stand. The numerical developments performed to simulate the different kinds of oxide damage are described. Three mechanical tests have been selected to approach the solicitations undergone by the oxide scale at the entry of the roll gap, suspected to be critical for damage: the 4-point hot bending test, the hot tension test and the hot plane strain compression test. A numerical study is performed in parallel. Based on constitutive data obtained from these three mechanical tests, the mechanical description of a rolling stand is sufficient for satisfactory simulation of the industrial process.

Numerical Study of the Thermodynamic Behavior and Wear on the Surface of Hot-Rolling Descaling Roll

Effect of hot rolling process parameters on surface wear of descaling rolls

A Numerical Study on Contact Condition and Wear of Roller in Cold Rolling

Evolution of Microstructure, Temperature and Stress in A High Speed Steel Work Roll During Hot Rolling: Experiment and Modelling

Multi-field coupling numerical simulation and experimental research of submerged arc surfacing process on the descaling rolls with different wall thickness

Microstructural Study and Residual Stress Measurement of a Hot Rolling Work Roll Material During Isothermal Oxidation

Surface Roughness Micro-Deformation and Transfer of Bulk Steel in Hot Rolling

Thermal-Mechanical Finite Element Analysis of Evolution of Surface Cracks During Slab Rolling

Numerical Simulation Research on the Temperature Field and Hot Roll Crown Model of Hot Continuous Rolling Mills

Numerical Simulation Study of Mental Flow Law of Low-Carbon Steel in Hot Rolling

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

Rolls wear characterization in hot rolling process

Experimental study and numerical simulation of iron oxide scales mechanical behavior in hot rolling

Numerical Evaluation of a High Speed Steel Work Roll During Hot Strip Rolling Process

Optimization of wear and cracks in roller contact under different coating and a range of loads and temperature with fixed speed using design expert (DOE) and finite element model

Theoretical and Experimental Investigation of Thermal and Oxidation Behaviours of a High Speed Steel Work Roll During Hot Rolling

Theoretical Analysis and Numerical Simulation of External Spline Cold Rolling

STUDY ON ROLL WEAR ON HOT STRIP ROLLING MILL

Numerical Analysis on Flatness Adjusting Performance of Hot Wide Strip Temper Mill with Small-Diameter Work Rolls

Surface texture transfer in skin-pass rolling with the effect of roll surface wear

Surface Roughness Transformation and Deformation of the Scale in Hot Rolling