Abstract:Hot rolling of steels represents one of the most critical steps to achieve finished products with high surface quality. The increasing productivity added to the rising customer requirements result in more and more severe scheduling rules for the HSM. Strip surface aspect is very important in terms of HSM operation costs and productivity limitation. Among all surface defects, the most crippling comes from the oxide scale formed at the surface of the steel during the hot rolling, at the entry of the finishing mill (last part of the hot strip mill): the secondary scale, mechanical behaviour of which is still poorly known. The secondary scale may fracture under the stresses imposed by the successive rolling passes, and can be embedded in the steel strip surface: this defect is called "rolled-in scale defect". In addition, the extrusion of the subjacent metal inside the oxide cracks induces large local modifications of friction and heat transfer conditions. Consequently, a precise description of oxide scale deformation mechanisms is necessary to better define the boundary conditions in a roll bite and to better understand the initiation mechanisms of rolled-in scale defects. Our scientific objective is then to provide a realistic physical and numerical model to simulate the oxide scale flow in the roll bite and in particular, its damage. After the presentation of the industrial process and the context of this study, the physical and mechanical properties of the oxide scale in the finishing mill are investigated. We introduce the Forge2® finite element software, selected for this study to simulate the oxide scale behaviour in a finishing mill stand. The numerical developments performed to simulate the different kinds of oxide damage are described. Three mechanical tests have been selected to approach the solicitations undergone by the oxide scale at the entry of the roll gap, suspected to be critical for damage: the 4-point hot bending test, the hot tension test and the hot plane strain compression test. A numerical study is performed in parallel. Based on constitutive data obtained from these three mechanical tests, the mechanical description of a rolling stand is sufficient for satisfactory simulation of the industrial process.

Numerical Simulation of Oxide Scales Evolution During Hot Strip Rolling

Microstructural Study and Residual Stress Measurement of a Hot Rolling Work Roll Material During Isothermal Oxidation

Surface Roughness Transformation and Deformation of the Scale in Hot Rolling

Machine Learning Model for Thickness Evolution of Oxide Scale During Hot Strip Rolling of Steels

Analysis of tribological feature of the oxide scale in hot strip rolling

Experimental study and numerical simulation of iron oxide scales mechanical behavior in hot rolling

Tribological Analysis of Oxide Scales During Cooling Process of Rolled Microalloyed Steel

Oxidation Kinetics and Spallation Model of Oxide Scale during Cooling Process of Low Carbon Microalloyed Steel

Experimental Study on Adhesion of Oxide Scale on Hot-Rolled Steel Strip

High-Temperature Oxidation and Subscale Morphology of Si Containing Steels

Evolution of Microstructure, Temperature and Stress in A High Speed Steel Work Roll During Hot Rolling: Experiment and Modelling

Numerical Simulation of Microstructure Evolution During Continuous Hot Rolling Process of GCr15 Steel Rod

Effect of Rolling Reduction and Temperature on the Oxide Scale of Hot Rolled Mild Steel Strip

A Review of Microstructure and Microtexture of Tertiary Oxide Scale in a Hot Strip Mill

The effect of oxide scale of stainless steels on friction and surface roughness in hot rolling

NONLINEAR THREE-DIMENSIONAL SIMULATION FOR HOT CONTINUOUS ROLLING OF STRIP STEEL

Numerical simulation on recrystallization behavior and microstructure evolution during hot continuous rolling process of 38CrMoAl steel rod

Influence of Oxide Scales on the Corrosion Behaviors of B510L Hot-Rolled Steel Strips

Isothermal Structure Transformation and Kinetics Behavior of Oxide Scale on Low Carbon Steel

Numerical Simulation of the Plate Rolling Process

Numerical Study of the Thermodynamic Behavior and Wear on the Surface of Hot-Rolling Descaling Roll